A360 aluminum alloy
Investigation on effect of die temperature and reheating treatment on microstructure of A360 aluminium alloy semi-solid forming [-1, 4*, 2010, Pages 341-347]
AA5052 Aluminium Alloy
Pitting corrosion of nanostructure AA5052 aluminum alloy fabricated by Accumulative Roll-Bonding in chloride media [-2, 1*, 2009, Pages 72-82]
AA6061 alloy
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Ab initio simulation
An Investigation on Pd Decorated Carbon Nanotube Sensitivity for CO Gas Sensor Application [Volume 5, Issue 2, 2016, Pages 59-66]
Abrasive
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Absorption
Using of Granulated Nano-Hydroxyapatite to Absorb Cadmium from Aqueous Ssolutions in a fixed Bed Reactor [Volume 5, Issue 2, 2016, Pages 49-57]
Accumulative Roll Bonding
Investigation of severe plastic deformation effect on microstructure of Ti-6Al-4V alloy [Volume 5, Issue 1, 2016, Pages 59-64]
Accumulative Roll-Bonding (ABR)
Pitting corrosion of nanostructure AA5052 aluminum alloy fabricated by Accumulative Roll-Bonding in chloride media [-2, 1*, 2009, Pages 72-82]
Acid-base method
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Acid leaching
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Acid solution
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Acrylic acid
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Acrylic acid
Study on effect of aluminum nitrate on conductivity properties of hydrogel nanocomposite based on Acrylic acid/CNTs [Volume 7, Issue 2, 2018, Pages 57-61]
Activation
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Adhesion
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Adsorption
The Effect of Pore Structure on the Adsorption and Storage of Hydrogen in Nanozeolite [-2, 4*, 2009, Pages 347-354]
Adsorption
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Adsorption
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
Adsorption
Removal of Phosphate from Aqueous Media by Lanthanum Modified Nanochitosan [Volume 9, Issue 2, 2020, Pages 9-18]
Adsorption
Methylene Blue Removal from Aqueous Solution Using Zein-Modified Kaolin [Volume 9, Issue 2, 2020, Pages 53-61]
Adsorption
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Adsorption
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Adsorption
Mechanism of Strontium Adsorption on Nanostructured Hydroxyapatite in an Aqueous Solution [Volume 11, Issue 1, 2022, Pages 23-34]
Adsorption
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Adsorption
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Adsorption energy
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Adsorption Isotherm
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Adsorption Kinetic
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Aerospace
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
Ag and Au nanoparticles
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Age Hardening
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Aggregate
Hydrothermal Synthesis of Nano Zns: An Investigation about the Effects of Synthesis Period on Particles Morphologies [-1, 3*, 2010, Pages 267-273]
Aging Process
Effect of Yttrium Additive Oxide on Phase Stability of Bismuth Oxide [-4, 1*, 2007, Pages 69-76]
Aging Thermomechanical
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Aging Treatment
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Aging Treatments
Effect of Aging Treatment on Tensile and Superelastic Behavior in Ni-Rich NiTi Alloy (50.9 Atom%Ni) [-2, 3*, 2009, Pages 231-240]
Airflow
Numerical Simulation of Natural Ventilation and Cooling a Building by Combined Wind tower and Solar Chimney [-1, 4*, 2010, Pages 301-308]
Air pollution
Study of Nano Particles Effects of Fe and Mn Compound in (La,Ce)(Pd,Co)O3 Perovskite Catalysts and its Comparison with Imported Catalyst of Iran Khodro with Nobel Metals [-3, 2*, 2008, Pages 153-162]
Al10Co25Cr8Fe15Ni36Ti6
Microstructural Investigation of The Cast and Homogenized Al10Co25Cr8Fe15Ni36Ti6 High Entropy Alloy [Volume 13, Issue 1, 2024, Pages 46-56]
Al) 2
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
Al2O3-SiC-C
The Effect of Surfactant Agents on the Oxidation and Slag Corrosion Resistances of the Self-Flowing Refractory Castables in BF Troughs [-1, 2*, 2010, Pages 151-159]
Al - 4.5 wt% Cu
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Al5083 alloy
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Al-7075
Study on the Formation of Globular Microstructure in 7075-Al alloy during Strain Induced Melt Activated (SIMA) process [Volume 5, Issue 4, 2016, Pages 19-28]
Al and TiO2 powders
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2012, Pages 69-78]
Al-Cu Alloys
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Alkaline Solution
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Alkaline Sulfide Solution
The Effect of Temperature on the Electrowinning of Antimony from Alkaline Sulfide Solution [Volume 9, Issue 4, 2020, Pages 47-58]
Alloying
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
Al-Mg alloy
Microstructural Evolution of Nanostructured Al-Mg Powder System During Ball Milling and Post Heat Treatment Processes [Volume 6, Issue 2, 2017, Pages 35-43]
Alpha-tricalcium phosphate
Synthesis and Characterization of Alpha-Tricalcium Phosphate and Its Single-Component Cement [Volume 11, Issue 2, 2022, Pages 1-12]
Alumina
Mullite Formation by Direct Oxidation Method in Al2O3+Si Al+SiO2 and Al+Si Systems [-4, 1*, 2007, Pages 31-44]
Alumina
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Alumina
Fabrication of Alumina Parts Using Injection Molding [-1, 4*, 2010, Pages 349-356]
Alumina
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Alumina
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Alumina
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
Alumina
Properties, type and amount of the final phases of alumina-zircon [Volume 5, Issue 1, 2016, Pages 25-32]
Alumina
Effect of Precursor Concentration on the Microstructure of Aluminum Oxide Coating Made through the Solution Precursor Plasma Spray Process [Volume 11, Issue 1, 2022, Pages 1-12]
Alumina
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Alumina/aluminium titnate
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Alumina-based coatings
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Alumina-Boron Carbide
Fabrication of Al2O3-B4C Nanocomposite via Ball Milling, Subsequent Self-Propagation High-Temperature Synthesis, and Final Hot Pressing [Volume 9, Issue 4, 2020, Pages 1-11]
Alumina-Fe composite
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Alumina-Magnesia
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Alumina-mullite-zirconia composite
Improvement of thermal shock behavior of alumina-mullite-zirconia composite using nano SiC particles [Volume 2, Issue 1, 2013, Pages 55-64]
Alumina nano powder
Study the Effect of Different Electrodes, Suspension Conductivity and Cell Resistivity, on Yield of EPD in Nano Alumina Suspension [Volume 5, Issue 3, 2016, Pages 1-9]
Alumina-Silicon carbide
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Aluminium-zircon
Investigation of the Effect of Zircon particles on Microstructures and Mechanical Properties of
Aluminum-Zircon Composite by Stir Casting Method [Volume 2, Issue 1, 2013, Pages 29-37]
Aluminum
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2013, Pages 42-49]
Aluminum
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Aluminum 2024 alloy
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Aluminum Alloy
Assessment Of Dissimilar 6061-T6 Al/DP590 Dual Phase Steel Welds Produced Using Friction Stir Spot Welding [Volume 5, Issue 1, 2016, Pages 1-10]
Aluminum alloy 7014
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Aluminum-based Nano Composite
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Aluminum-Copper Aging
Influence of the AC Electrical Constant Current on the Aging Behavior of Al/Cu Bimetal [Volume 9, Issue 3, 2020, Pages 11-18]
Aluminum Evaporation
Removing of the Niobium Rich Inclusions from Microstructure of a New Titanium Aluminide Intermetallic Alloy [-1, 2*, 2010, Pages 97-106]
Aluminum foam
Friction Stir Welding of Commercially Pure Aluminum Foams Manufactured by Accumulative Roll-Bonding Process [Volume 3, Issue 3, 2014, Pages 35-42]
Aluminum nitride
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Aluminum sacrificial anode
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Al-Zn-In
Verifying the Effects of SIMA (Strain Induced Melt Activation) Process on Corrosion Behavior in Al Sacrificial Anodes [Volume 5, Issue 3, 2016, Pages 51-64]
Amorphous Phases
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Amorphous silica
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Anatase
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Anise extract
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Anisotropic polarization
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Annealing
Reinforcement and Annealing Effect on Microstructural Properties of Al-10Mg/Al21O3 Nanocomposites Prepared with Mechanical Alloying
Techniques [Volume 5, Issue 2, 2016, Pages 17-23]
Annealing temperature
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Anode
The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium [-2, 3*, 2009, Pages 263-271]
Anodizing
Anodizing Of Titanium in Acidic Electrolytes and Evaluation of Its Corrosion Resistance in PBS Physiologic Solution [-2, 1*, 2009, Pages 11-20]
Anodizing
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Anodizing
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
Antibacterial agent
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
Antimony Recovery
The Effect of Temperature on the Electrowinning of Antimony from Alkaline Sulfide Solution [Volume 9, Issue 4, 2020, Pages 47-58]
Antireflective Coating
Deposition and Determination of the Properties of Silicon Nitride Films in Argon and Nitrogen Atmospheres [-3, 2*, 2008, Pages 175-182]
Apatite structure
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Api5-GrB steel
Investigation of Electrical Resistance and Electrophoretic Deposition of Al2O3-TiO2 Nanoparticles in Different Alcoholic Environments [Volume 5, Issue 2, 2016, Pages 9-16]
Aqueous colloidal coating approach
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Argon Plasma
Effect of Aging on the Electrical Conductivity of Tin Oxide Thick Film in Presence of Ethanol [-4, 1*, 2007, Pages 95-105]
Artificial Intelligent
A Novel Idea on Automatic Network Design for Terrestrial Laser Scanner [-4, 1*, 2007, Pages 13-24]
Arylamide
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Ascorbic acid
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
Ascorbic acid
Synthesis and Characterization of Polylactic/Glycolic Acid Copolymer to Prepare Biodegradable Skin Staple [Volume 13, Issue 1, 2024, Pages 69-81]
Atmosphere Plasma Spray (APS)
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Atmospheric Water Harvesting
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
Atomic Force Microscopy (AFM)
Effect of substrate temperature on nanostructure zinc sulphide thin film in IR block applications [Volume 2, Issue 2, 2013, Pages 67-75]
Atom in Molecule
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Au/Ag nanoparticles
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
Austempering treatment
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
Austenite Decomposition
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
AZ31
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
AZ31 alloy
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
AZ31D
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
B
B4C
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Back Surface Field (BSF)
Simulation and Optimization of Bifacial Solar Cells with a Hetero-Junction MicroCrystalline Intrinsic thin layer [Volume 5, Issue 2, 2016, Pages 41-48]
Bacterial Concrete
An Overview of Different Types of Self-Healing Concrete Construction Methods [Volume 11, Issue 1, 2022, Pages 35-53]
BaFe12O19
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Ball milling
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Ball milling
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Balls to Powder Ratios
Investigation of Mechanical Properties and Microstructure of WC-10%Wtco Containing Tac Grain Growth Inhibitor [-2, 4*, 2009, Pages 391-399]
Band gap
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Band gap
Determination of the Electronic Structure of α-Al2O3 with First Principle Study [-1, 2*, 2010, Pages 145-150]
Barium Hexaferrite
Effect of Synthesis Conditions in the Co-Precipitation Method on the Formation Mechanism of Barium Hexaferrite Nano-Crystalline Particles [-1, 4*, 2010, Pages 293-300]
Barium Hexaferrite
Investigation the Radar Absorption Behavior of Polymer Matrix Composites with Doped Barium Hexaferrite Particles [Volume 5, Issue 3, 2016, Pages 17-23]
Barium Hexaferrite
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Barium Strontium Titanate
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
Barrier layer
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
BaTiO3
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Battery
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Battery
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
Battery
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Benzaldehyde
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Benzotriazole
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Benzyl alcohol
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Bimetal clamp
Influence of the AC Electrical Constant Current on the Aging Behavior of Al/Cu Bimetal [Volume 9, Issue 3, 2020, Pages 11-18]
Bimodal high density polyethylene
Effect of carbon black masterbatch and polymer process aids based on fluoroelastomer and hyper branch polymers on melt fracture of bimodal polyethylene [Volume 7, Issue 3, 2018, Pages 67-79]
Binder free electrode
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Bioactive Glass
Preparation of Porous 45S5 Bioactive Glass by Gas Foaming [-1, 4*, 2010, Pages 319-330]
Bioactive Glass
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Bioactive Glass
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Bioactive Glass
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Bioactive glass nanoparticles
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Bioactive Glass Nanopowder
Preparation, Characterization and Bioactivity Evaluation of Sol–Gel Bioactive Glass Nano Powder with Three Different Compositions [-1, 3*, 2010, Pages 275-283]
Bioactive glass particles
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Bioactivity
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Bioactivity
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2013, Pages 31-36]
Bioactivity
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Bioactivity
Investigation the In Vitro and Bactericidal Properties of Magnesium and Copper Containing Bioactive Glasses [Volume 9, Issue 2, 2020, Pages 19-33]
Bioceramics
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Bioceramics
The Effect of Concentration of Calcium Phosphate Salts on Morphology and Nanostructure of Hydroxyapatite Coating on Titanium with Thermal - Electrodeposition Method [-1, 4*, 2010, Pages 285-292]
Biocompatibility
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Biocompatibility
Investigation of Properties of TiO2/MgO Dual Layer Thin Film Formed by Magnetron Sputtering on Mg Alloy [Volume 9, Issue 3, 2020, Pages 1-9]
Biodegradable skin stapler
Synthesis and Characterization of Polylactic/Glycolic Acid Copolymer to Prepare Biodegradable Skin Staple [Volume 13, Issue 1, 2024, Pages 69-81]
Biodiesel
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
Bioglass 45S5
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
Bioglass 45S5. Scaffold
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
Biological Micro-Organism
Hydrodynamic Interactions between Two Micro-Swimmers [-1, 2*, 2010, Pages 139-143]
Biomaterial
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Biomedical applications
Investigation the In Vitro and Bactericidal Properties of Magnesium and Copper Containing Bioactive Glasses [Volume 9, Issue 2, 2020, Pages 19-33]
Biomimetic
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Biomimetic
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Biomineralization
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Biotite
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
Bismuth Oxide
Effect of Sintering Time and Temperature on 3Bi2O3-Y2O3 [-4, 1*, 2007, Pages 59-67]
Bismuth Oxide
Effect of Yttrium Additive Oxide on Phase Stability of Bismuth Oxide [-4, 1*, 2007, Pages 69-76]
Bismuth Oxide
Effect of yttria- dyspersia co-dopants on cubic phase stability of Bismuth oxide [Volume 2, Issue 2, 2013, Pages 59-65]
Blade
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Bond Coat
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Bonding Strength
Corrosion and Bonding Strength Enhancements in Bioglass Coating on CP-Ti by Using a Combination of Micro-arc Oxidation and Electrophoretic Deposition [Volume 6, Issue 1, 2017, Pages 61-69]
Bone scaffold
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Bone scaffold
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Bone scaffold
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Bone scaffold
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
Bone substitute
Preparation of Porous 45S5 Bioactive Glass by Gas Foaming [-1, 4*, 2010, Pages 319-330]
Bone tissue engineering
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
Bone tissue engineering
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
Bone tissue engineering
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Bone tissue engineering
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
Bone tissue engineering
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Boron carbide
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Boron carbide
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Boron nitride nanocones
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Box-Behnken Experimental Design
Effect of Composition and Sintering Temperature on PermanentLinear Change of Alumina-Magnesia-Graphite Refractories Using Box-Behnken Experimental Design [-2, 4*, 2009, Pages 355-368]
Brass
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Brushing
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Bulk Module
Calculation of the structure parameters of Tin dioxide in CaCl2 phase [-2, 1*, 2009, Pages 57-65]
Bulk Modulus
Determination of the Electronic Structure and Density of Electronic States of Orthorhombic Lacro3 Ceramic in the Framework of Density Functional Theory (DFT) [-2, 4*, 2009, Pages 341-345]
Burn wound
Fabrication and Evaluation of Physical and Biological Properties of Hydroxyethyl Cellulose/Hyaluronic Acid-Based Scaffolds Used for Second-Degree (Partial-Thickness) Burns Wounds Healing [Volume 9, Issue 4, 2020, Pages 35-46]
C
CaCu3Ti4O12
Investigation of the Microstructure and Dielectric Properties of Polyvinyl Alcohol-CaCu3Ti4O12 Composites [Volume 11, Issue 1, 2022, Pages 13-22]
Cadmium
Using of Granulated Nano-Hydroxyapatite to Absorb Cadmium from Aqueous Ssolutions in a fixed Bed Reactor [Volume 5, Issue 2, 2016, Pages 49-57]
Cadmium Oxide
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
CaF2 crystals
Investigation into the Processing of Transparent Oxyfluoride Glass and Glass Ceramics Containing CaF2 Nanocrystals in Presence of K2O Additive [Volume 4, Issue 3, 2015, Pages 1-7]
Calcium deficiency hydroxyapatite
Synthesis and Characterization of Alpha-Tricalcium Phosphate and Its Single-Component Cement [Volume 11, Issue 2, 2022, Pages 1-12]
Calcium fluoride
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
Calcium phosphate cement
Effect of adding nano-titania on mechanical properties and hydroxyapatit formation of calcium phosphate cement in human blood plasma [Volume 2, Issue 1, 2013, Pages 21-28]
Calcium phosphate deposition
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Calcium silicate cement
Effect of Chitosan Polymer on Structural and Setting Properties Calcium Silicate Based on Dental Cement [Volume 5, Issue 4, 2016, Pages 45-52]
Cancer treatment
Formulation, Characterization and Evaluation of Quercetin-loaded Chitosan-functionalized Mesoporous Silica for Targeted Drug Delivery in Cancer Treatment [Volume 5, Issue 4, 2016, Pages 37-44]
Ca(OH)2 Nanoparticles
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Carbon
Evaluation the Role of Carbon in the Polarization Resistance of Silver Electrodes Used in the Silver Oxide-Zinc Cells [Volume 5, Issue 3, 2016, Pages 33-40]
Carbon cloth
Deposition of Molybdenum disulfide nanosheets on carbon cloth by electrophoretic method and their performance in hydrogen evolution reaction [Volume 9, Issue 1, 2020, Pages 11-17]
Carbon/CuFe2O4 Nanocatalyst
The Effect of Modified Cathode with Carbon/CuFe2O4 Nanocatalyst and Electrolyte of 1-Hexyl-3-Methylimidazolium Chloride ([Hmim][Cl]) on the Performance and Lifetime of Lithium-Air Battery [Volume 9, Issue 3, 2020, Pages 27-35]
Carbon Fibers
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Carbon Fibers
The Effect of Thermal Cycles on the Impact Performance of Carbon Fibers-Epoxy/Aluminum Fibers Metal Laminates [Volume 11, Issue 3, 2022, Pages 1-14]
Carbonizing
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Carbon-monoxide gas sensor
An Investigation on Pd Decorated Carbon Nanotube Sensitivity for CO Gas Sensor Application [Volume 5, Issue 2, 2016, Pages 59-66]
Carbon Nanotube
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
Carbon Nanotube
Hydroxyapatite Bioceramic Heat Transfer Comparison in Water and Simulated Body Fluid after Addition of Carbon Nanotube [Volume 11, Issue 1, 2022, Pages 95-105]
Carbon nanotubes
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Carbon nanotubes
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
Carbon nanotubes
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Carbon nanotubes
Flexible Multicomponent Nanocomposite Cover for Efficient Absorption of Electromagnetic Waves [Volume 11, Issue 2, 2022, Pages 27-43]
Carbon Nitride
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Carbothermal reduction
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
Cartesian-staggered grid
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Cartesian-staggered grid
Suppression of Vortex Shedding from Circular Cylinders Using Detached Short Splitter-Plates [-2, 3*, 2009, Pages 291-310]
Castable
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Castable Casting
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Castables
Investigation of Effective Parameters on The Properties Of The High Strong Chamotte Based Low –Cement Refractory Castable [-1, 3*, 2010, Pages 225-231]
Catalyst
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Catalyst
Rapid and Cost-Effective Biosynthesis of Copper Oxide Nanoparticles and Its Application as an Efficient Catalyst for Dye Removal in Aqueous Media [Volume 9, Issue 4, 2020, Pages 23-34]
Catalyst Converter
Study of Nano Particles Effects of Fe and Mn Compound in (La,Ce)(Pd,Co)O3 Perovskite Catalysts and its Comparison with Imported Catalyst of Iran Khodro with Nobel Metals [-3, 2*, 2008, Pages 153-162]
Catalysts
Optimization Study of Nickel Leaching from Used Catalysts and Investigation of Nickel Separation by Precipitation [Volume 9, Issue 4, 2020, Pages 71-77]
Cathode active material
Optimization of Li-Excess Content on the Performance of Lix(Ni0.3Mn0.5Co0.2)O2 Cathode Materials in Li-ion Battery [Volume 9, Issue 1, 2020, Pages 1-10]
Cathodic electrodeposition
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Cathodic Protection
Effects of Soil Compositions on Corrosion of Gas Transferring Pipelines [-1, 4*, 2010, Pages 331-339]
Cavitation
The Effect of Synthesis Temperature on TiO2 Nanoparticles Prepared by Sonochemical Method [-1, 2*, 2010, Pages 167-173]
CdS thin layer
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Cell resistivity
Study the Effect of Different Electrodes, Suspension Conductivity and Cell Resistivity, on Yield of EPD in Nano Alumina Suspension [Volume 5, Issue 3, 2016, Pages 1-9]
Cell Viability
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Cemented carbides
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Ce-Ni alloy
Effect of Ce-Ni alloy Addition on Hydrogen Desorption Temperature of Magnesium Hydride-Based Composite Produced by Mechanical Alloying [Volume 6, Issue 1, 2017, Pages 43-52]
Central composite design
Design of a Polymer-grafted Graphene Oxide Based Drug Delivery System for Curcumin: Optimization Using RSM and Cytotoxicity study [Volume 12, Issue 2, 2023, Pages 13-28]
Ceramic
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Ceramic Coating
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Ceramic-matrix composites
Approach the Interfacial Behaviour in Mini Composite SiCf/Sic By the Push-Out and Push-Back Tests [-1, 3*, 2010, Pages 185-192]
Ceramic Monolith
Study of Nano Particles Effects of Fe and Mn Compound in (La,Ce)(Pd,Co)O3 Perovskite Catalysts and its Comparison with Imported Catalyst of Iran Khodro with Nobel Metals [-3, 2*, 2008, Pages 153-162]
Ceramic Nano Composite
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Chamotte
Investigation of Effective Parameters on The Properties Of The High Strong Chamotte Based Low –Cement Refractory Castable [-1, 3*, 2010, Pages 225-231]
Characterization
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
Characterization
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Chemical Bath Deposition
Synthesis of Zinc Oxide Nanoparticles from 2-Methoxy Ethanol via Chemical Bath Deposition [-2, 4*, 2009, Pages 411-417]
Chemical Bath Deposition
The effect of bath temperature on structural properties of CdS thin layer produced by chemical bath deposition [Volume 3, Issue 2, 2014, Pages 81-90]
Chemical Deposition
Effect of Synthesis Temperature on the Morphology and Particles Size of Sno/Zno Nanocomposites Synthesized Via Chemical Bath Deposition, CBD (RESEARCH NOTE) [-2, 4*, 2009, Pages 419-426]
Chemical Deposition
Chemical Deposition of Nickel Hexacyanoferrate Nanoparticles on a Stainless-Steel Mesh Substrate for Supercapacitor Application [Volume 11, Issue 2, 2022, Pages 45-56]
Chemical Deposition
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Chemical getter
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Chemical Method
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Chemical Sensor
Determination of Vanadium by Optical Sensing Film [Volume 5, Issue 3, 2016, Pages 25-32]
Chemical Vapor Deposition
Synthesis of graphene from organic materials via layer deposition on metal surface [Volume 2, Issue 2, 2013, Pages 39-43]
Chicory
Synthesis and Characterization of Chitosan/Poly (Vinyl Alcohol) Polymer Nanofibers Containing Chicory Extract by Electrospun Method and Evaluation of Its Antibacterial Properties [Volume 11, Issue 4, 2022, Pages 31-44]
Chitosan
Effect of Chitosan Polymer on Structural and Setting Properties Calcium Silicate Based on Dental Cement [Volume 5, Issue 4, 2016, Pages 45-52]
Chitosan
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Chitosan
Removal of Phosphate from Aqueous Media by Lanthanum Modified Nanochitosan [Volume 9, Issue 2, 2020, Pages 9-18]
Chitosan
Fabrication and Characterization of Gelatin/Chitosan/Zinc Oxide Nanocomposite Hydrogels Intended for Biomedical Applications [Volume 11, Issue 2, 2022, Pages 57-69]
Chitosan
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Chitosan
Synthesis and Characterization of Chitosan/Poly (Vinyl Alcohol) Polymer Nanofibers Containing Chicory Extract by Electrospun Method and Evaluation of Its Antibacterial Properties [Volume 11, Issue 4, 2022, Pages 31-44]
Chitosan Nanoparticles
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
Circular Base plate
Exact Method in Design of Circular Base Plate under Large Eccentric Loads [-3, 2*, 2008, Pages 191-206]
Circular cylinders
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Circular cylinders
Suppression of Vortex Shedding from Circular Cylinders Using Detached Short Splitter-Plates [-2, 3*, 2009, Pages 291-310]
CIS Nanoparticles Ink
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
CK10 carbon steel
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Cladding
Effect of Alloying Elements on Hydrogen diffusion in dissimilar joint of Austenitic stainless steel/Carbon steel [Volume 2, Issue 3, 2013, Pages 50-59]
Cladding
Preparation and Characterization of Tungsten Silicide Cladding on Carbon Steel [Volume 5, Issue 4, 2016, Pages 29-36]
Clausius Mossotti factor
Deposition pattern Of Tin Oxide Nanoparticles Under Non-uniform AC Electric Fields [Volume 5, Issue 1, 2016, Pages 11-16]
CNT
Investigation of Addition of CNT and Sintering Process on Microstructure and Mechanical Properties of Al-Si3N4-CNT Nano Composite [Volume 9, Issue 1, 2020, Pages 39-48]
CNT-Pd Decorated
An Investigation on Pd Decorated Carbon Nanotube Sensitivity for CO Gas Sensor Application [Volume 5, Issue 2, 2016, Pages 59-66]
CO2 corrosion
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
CO2 Laser
Photoimmobilization of Synthesized Photoreative Gelatin by Laser Irradiation for Applications of Photobiolithography and Cell Printing [Volume 2, Issue 2, 2013, Pages 87-97]
Cobalt
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Cobalt Doped Hydroxyapatite
Chemical Synthesis and Characterization of Physical and Magnetic Properties of Cobalt Doped Hydroxyapatite Nanoparticles [Volume 5, Issue 2, 2016, Pages 1-8]
Cobalt ferrite
The Effect of Honey Addition on the Properties of CoFe2O4 Nanoparticles Synthesized by the Sol-Gel Auto-Combustion Method [Volume 11, Issue 4, 2022, Pages 1-18]
Cobalt (II
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
Cobalt oxide
Synthesis, Characterization and Electrochemical Performance of Nanostructured Cobalt Oxide and Nickel Cobalt Oxide Active Materials for Supercapacitors [Volume 6, Issue 3, 2017, Pages 61-68]
Cochlear implant
Improving the Performance of Signal Processor Unit in Cochlear Implants and Providing a Method for its Evaluation [-2, 4*, 2009, Pages 323-334]
Coconut coir
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
Coercive force
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Coercivity
The Effect of Honey Addition on the Properties of CoFe2O4 Nanoparticles Synthesized by the Sol-Gel Auto-Combustion Method [Volume 11, Issue 4, 2022, Pages 1-18]
CoFe2O4
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
CO gas
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Cold isostatic press
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Cold work
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Cold Work D6 Tool Steel
Effect of Cryotreatment on Microstructure and Wear Properties of Cold Work Tool D6 Steel [-3, 2*, 2008, Pages 137-152]
Collagen/silk fibroin
Fabrication and Characterization of Collagen Nanofiber/Fibroin Silk Scaffolds for Corneal Tissue Engineering [Volume 11, Issue 3, 2022, Pages 15-30]
Colloidal Suspension
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Color change
Study of the effect of silica nanoparticles on the conservative properties of acrylic coatings [Volume 2, Issue 3, 2013, Pages 69-78]
Colza oil
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
Co-Mg-Ferrite single phase
Thermo mechano-chemical synthesis, physical characterization and magnetic properties of Co-Mg-ferrite nanoparticles [Volume 7, Issue 2, 2018, Pages 1-6]
Commercial pure aluminum
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Compaction pressure
Production of AlTi porous bodies by SHS [Volume 1, Issue 1, 2012, Pages 51-57]
Composite
Investigation of the Effect of Zircon particles on Microstructures and Mechanical Properties of
Aluminum-Zircon Composite by Stir Casting Method [Volume 2, Issue 1, 2013, Pages 29-37]
Composite
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Composite
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Composite
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Composite
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Composite
Effect of Chitosan Polymer on Structural and Setting Properties Calcium Silicate Based on Dental Cement [Volume 5, Issue 4, 2016, Pages 45-52]
Composite
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
Composite
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Composite
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Composite
Investigation of Addition of CNT and Sintering Process on Microstructure and Mechanical Properties of Al-Si3N4-CNT Nano Composite [Volume 9, Issue 1, 2020, Pages 39-48]
Composite
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Composite
Effect of Sintering Temperature on Properties of Fused Silica- YSZ Composite Prepared by Spark Plasma Sintering [Volume 11, Issue 3, 2022, Pages 75-84]
Composite
Investigation of the Microstructure and Dielectric Properties of Polyvinyl Alcohol-CaCu3Ti4O12 Composites [Volume 11, Issue 1, 2022, Pages 13-22]
Composite
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Composites
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2012, Pages 69-78]
Compressive strength
Effect of adding nano-titania on mechanical properties and hydroxyapatit formation of calcium phosphate cement in human blood plasma [Volume 2, Issue 1, 2013, Pages 21-28]
Computational model
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
COMSOL Multyphysics Software
Investigation of the Effect of Phantom Size and Ferromagnetic Core of Ni-Cu Alloy on the Amount of Induction Heating in the Thermotherapy Process Using Comsol Multyphysics® Software [Volume 10, Issue 4, 2021, Pages 107-114]
Conductive Fibers
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
Conductive polymer
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
CoNiCrAlY
Investigation of Oxidation Mechanism of HVOF-CoNiCrAlY Coating in Early Stages of Application [Volume 5, Issue 4, 2016, Pages 53-63]
Constrained Ageing
Effect of Constrained Ageing on Orthodontic Wires for Changing Their Control to Reinforcements in Smart Metal/Polymer Composite [-2, 1*, 2009, Pages 28-39]
Contact angle
Synthesis of Hydrophobic Silica Coatings on Glass by Sol-Gel and Studying Silver Oxide Effect on the Wettability [Volume 2, Issue 3, 2013, Pages 60-68]
Contact Resistance
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Continuous Casting
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Controlled release
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Controlled release
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
Conversion efficiency
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Cooling Slope
Investigation on effect of die temperature and reheating treatment on microstructure of A360 aluminium alloy semi-solid forming [-1, 4*, 2010, Pages 341-347]
Copolymer
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Co-Polymer Polylactic/Glycolic Acid
Synthesis and Characterization of Polylactic/Glycolic Acid Copolymer to Prepare Biodegradable Skin Staple [Volume 13, Issue 1, 2024, Pages 69-81]
Copper-Beryllium Alloy
Effects of Nd: YAG Pulsed Laser Beam Parameters on Microstructure and Dimensions of Weld Pool for a Copper-Beryllium Plate [-3, 2*, 2008, Pages 207-216]
Copper oxide nanoparticles
Rapid and Cost-Effective Biosynthesis of Copper Oxide Nanoparticles and Its Application as an Efficient Catalyst for Dye Removal in Aqueous Media [Volume 9, Issue 4, 2020, Pages 23-34]
Copper Phtalocyanine
Effect of the PEDOT:PSS Thin Layer Coated on ITO Substrate on Two Layers Organic Solar Cells Properties Consist of Fullerene Copper Phtalocyanine [-1, 2*, 2010, Pages 117-122]
Copper phthalocyanine
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
Co-precipitation
Effect of Synthesis Conditions in the Co-Precipitation Method on the Formation Mechanism of Barium Hexaferrite Nano-Crystalline Particles [-1, 4*, 2010, Pages 293-300]
Co-precipitation
Synthesis, characterization and electrochemical performance of ZnxNi1-x(OH)2 nanostructured layered double hydroxide active material for supercapacitors [Volume 5, Issue 1, 2016, Pages 17-24]
Co-precipitation
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Co-precipitation
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Co-precipitation process
Optimization of Li-Excess Content on the Performance of Lix(Ni0.3Mn0.5Co0.2)O2 Cathode Materials in Li-ion Battery [Volume 9, Issue 1, 2020, Pages 1-10]
Cordierite
An Investigation on the Fabrication and Properties of Ultra Low Cement Cordierite Mullite Refractory Castables [-1, 4*, 2010, Pages 309-317]
Cordierite
Fabrication of Cordierite Glass Ceramic with the Use of Silicone Resin and Investigating Its Mechanical Properties [Volume 9, Issue 2, 2020, Pages 63-71]
Cordierite
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Core/ Shell
Synthesis of SnO2/ ZnO Core- Shell Nanocomposites via Sonochemical Method and Evaluation of their Gas Sensing Properties [Volume 5, Issue 2, 2016, Pages 25-30]
Corrosion behavior
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Corrosion inhibitor
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Corrosion Resistance
Anodizing Of Titanium in Acidic Electrolytes and Evaluation of Its Corrosion Resistance in PBS Physiologic Solution [-2, 1*, 2009, Pages 11-20]
Corrosion Resistance
Investigating theEffect of Heat Treatment on Microstructure, Hardness andCorrosion Behavior of Nickel-Aluminum Bronze [Volume 2, Issue 1, 2013, Pages 71-80]
Corrosion Resistance
Effect of Tempertureon Properties and Corrosion Behavior of Electroplated Nickel- Graphene Composite Coating [Volume 4, Issue 4, 2015, Pages 19-26]
Corrosion Resistance
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Corrosion Resistance
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Co-Zn ferrite
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Cr2O3-YSZ-SiC
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Cracking
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Crack propagation
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
Cr Complex
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Cross-Linker
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Cryotreatment
Effect of Cryotreatment on Microstructure and Wear Properties of Cold Work Tool D6 Steel [-3, 2*, 2008, Pages 137-152]
Crystal Plasticity
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
Crystal plasticity modelling
Simulation of Developed Texture During Warm Rolling of IF Steel [Volume 13, Issue 1, 2024, Pages 1-11]
Cu
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Cu-Alumina Metal Matrix Nano Composite
Synthesys of Cu-Al2O3 Metal Matrix Nano Composite From Cuo and Al Powders by Using High Energy Planetary Fast Milling [-2, 4*, 2009, Pages 401-410]
Cubic Phase
Effect of Sintering Time and Temperature on 3Bi2O3-Y2O3 [-4, 1*, 2007, Pages 59-67]
Cubic Phase
Effect of Yttrium Additive Oxide on Phase Stability of Bismuth Oxide [-4, 1*, 2007, Pages 69-76]
Cubic Phase
Effect of yttria- dyspersia co-dopants on cubic phase stability of Bismuth oxide [Volume 2, Issue 2, 2013, Pages 59-65]
Cu-doped ZnO
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
Cu/Graphene nanocomposites
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Cu ions
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Cu-Ni alloy
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
CuO
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Cu-Sn alloys
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
CVD
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
Cyclic compressive tests
Effect of Pore Content on Mechanical Properties of Porous Nitinol under Compressive Loading [Volume 2, Issue 2, 2013, Pages 45-52]
Cyclodextrin
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Cytotoxicity
Formulation, Characterization and Evaluation of Quercetin-loaded Chitosan-functionalized Mesoporous Silica for Targeted Drug Delivery in Cancer Treatment [Volume 5, Issue 4, 2016, Pages 37-44]
CZTS
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
D
Dandelion-Like
Synthesis and Characterization of Dandelion-Like Hydroxyapatite Via a Miclle-Directed Hydrothermal Method [-2, 3*, 2009, Pages 255-262]
Dehumidification wheel
Simulation of A Solid Adsorption System with Rotary Desiccant Wheel for Dehumidification [-1, 3*, 2010, Pages 201-214]
Dense Structural Materials
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
Densification Behavior
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Density
Sintering Behavior of Lithium Fluoride Pellets [-3, 2*, 2008, Pages 107-114]
Density
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Density functional theory
Determination of the Electronic Structure of α-Al2O3 with First Principle Study [-1, 2*, 2010, Pages 145-150]
Density functional theory
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Density functional theory
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Density functional theory
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Density functional theory
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Density functional theory (DFT)
Determination of the Electronic Structure and Density of Electronic States of Orthorhombic Lacro3 Ceramic in the Framework of Density Functional Theory (DFT) [-2, 4*, 2009, Pages 341-345]
Density functional theory (DFT)
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
Density of Electronic State
Determination of the Electronic Structure and Density of Electronic States of Orthorhombic Lacro3 Ceramic in the Framework of Density Functional Theory (DFT) [-2, 4*, 2009, Pages 341-345]
Density of state
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Density of states
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Dental cement
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Dental cement
Effect of Chitosan Polymer on Structural and Setting Properties Calcium Silicate Based on Dental Cement [Volume 5, Issue 4, 2016, Pages 45-52]
Dental Coating
Hydroxyapatite Bioceramic Heat Transfer Comparison in Water and Simulated Body Fluid after Addition of Carbon Nanotube [Volume 11, Issue 1, 2022, Pages 95-105]
DFT
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
DFT
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Diamond-like carbon
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Diamond-like carbon
Investigating of Structural Evolution of Diamond-Like Carbon Thin Film Applied by Ion Beam Deposition Technology under the Effect of Substrate Temperature [Volume 11, Issue 3, 2022, Pages 31-42]
Dielectric Constant
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
Dielectric Constant
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Dielectric properties
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Dielectric properties
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Dielectric properties
Investigation of the Microstructure and Dielectric Properties of Polyvinyl Alcohol-CaCu3Ti4O12 Composites [Volume 11, Issue 1, 2022, Pages 13-22]
Dielectrophoresis
Deposition pattern Of Tin Oxide Nanoparticles Under Non-uniform AC Electric Fields [Volume 5, Issue 1, 2016, Pages 11-16]
Diethylene Glycol
Effect of Synthesis Conditions in the Co-Precipitation Method on the Formation Mechanism of Barium Hexaferrite Nano-Crystalline Particles [-1, 4*, 2010, Pages 293-300]
Differential Scanning Calorimetry (DSC)
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Diffuse Reflectance Spectra (DRS)
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
Dipsid
Production of Glass-Ceramics from Slag of Iron Alloyed Steel [Volume 2, Issue 2, 2013, Pages 23-31]
Direction
Suggestion and Verification of a New Statistical Model for Wind Speed and Direction [-1, 2*, 2010, Pages 123-138]
Dispersion
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Dissimilar joining
Assessment Of Dissimilar 6061-T6 Al/DP590 Dual Phase Steel Welds Produced Using Friction Stir Spot Welding [Volume 5, Issue 1, 2016, Pages 1-10]
Dissimilar Metal Welding
Effect of Alloying Elements on Hydrogen diffusion in dissimilar joint of Austenitic stainless steel/Carbon steel [Volume 2, Issue 3, 2013, Pages 50-59]
Divalent lead
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Divalent nickel
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Doped Graphite
Storage Of Hydrogen Fuel In Metal Impregneted Graphene [Volume 3, Issue 1, 2014, Pages 55-60]
Doping
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Drug Delivery
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Drug Delivery
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
Drug delivery system
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Drug release
Synthesis and Characterization of Modified SiO2 Nanofibers to Evaluate the Release of Doxorubicin (DOX) Anticancer Drug [Volume 10, Issue 1, 2021, Pages 25-32]
Drug release
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
Dual Fuel System for Automobiles
Study of Nano Particles Effects of Fe and Mn Compound in (La,Ce)(Pd,Co)O3 Perovskite Catalysts and its Comparison with Imported Catalyst of Iran Khodro with Nobel Metals [-3, 2*, 2008, Pages 153-162]
Dual-phase steel
Assessment Of Dissimilar 6061-T6 Al/DP590 Dual Phase Steel Welds Produced Using Friction Stir Spot Welding [Volume 5, Issue 1, 2016, Pages 1-10]
Dye pollution
Rapid and Cost-Effective Biosynthesis of Copper Oxide Nanoparticles and Its Application as an Efficient Catalyst for Dye Removal in Aqueous Media [Volume 9, Issue 4, 2020, Pages 23-34]
Dye sensitized solar cell
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Dye-sensitized solar cell
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
Dye-sensitized solar cell
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Dye-sensitized solar cell
Investigation of Effect Electrolyte on Performance of Dye-Sensitized Solar Cells Based on Indoline Dyes [Volume 5, Issue 3, 2016, Pages 11-16]
Dynamic mechanical properties
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
E
E8010-P1
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Early Stages of Oxidation
Investigation of Oxidation Mechanism of HVOF-CoNiCrAlY Coating in Early Stages of Application [Volume 5, Issue 4, 2016, Pages 53-63]
EBW repair welding
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Eccentric loads
Exact Method in Design of Circular Base Plate under Large Eccentric Loads [-3, 2*, 2008, Pages 191-206]
Effect of pH
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Efficiency
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Eggshell membrane
An overview of the Application of Eggshell Membrane in the Production of Engineered Wound Dressing: structure, characteristics and modification [Volume 13, Issue 1, 2024, Pages 12-30]
Elecrtoless plating
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Electrical conductivity
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
Electrical conductivity
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Electrical conductivity
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Electrical Furnace
Investigation Some Properties of Graphite for Using it as a Heating Element in High Temperature Vacuum Furnace [-4, 1*, 2007, Pages 25-30]
Electrical Furnace
Microstructure Evaluation of Al-Mg-Sic Composite through Sintering by Microwave and Electrical Furnace [-2, 3*, 2009, Pages 219-230]
Electrical Properties
The Study of Tl2O3َ Addition on Microstructure and Electrical Properties of High-voltage SnO2 Varistors [Volume 9, Issue 1, 2020, Pages 33-38]
Electrical Properties
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Electrical Properties
Synthesis of PZT by Two-Step Solid State Reaction and Evaluation of the Effect of Nb2O5 Doping on Its Electrical Properties [Volume 11, Issue 4, 2022, Pages 55-64]
Electrical resistivity
Effect of Constrained Ageing on Orthodontic Wires for Changing Their Control to Reinforcements in Smart Metal/Polymer Composite [-2, 1*, 2009, Pages 28-39]
Electrochemical Capacitance
Deposition of Graphene Oxide Using Electrophoretic Method and Heat Treatment Temperature Effect on the Character of the Supercapacitor [Volume 5, Issue 3, 2016, Pages 41-50]
Electrochemical characterization
Effect of Different Types of Electrochemical Methods on the Super Capacitor Properties of Thin Graphene Oxide Reduced by Electrochemical Method [Volume 9, Issue 2, 2020, Pages 35-42]
Electrochemical Corrosion
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Electrochemical deposition
Investigation of Electrical Resistance and Electrophoretic Deposition of Al2O3-TiO2 Nanoparticles in Different Alcoholic Environments [Volume 5, Issue 2, 2016, Pages 9-16]
Electrochemical deposition
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Electrochemical deposition
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Electrochemical properties
Electrochemical Performance of LiFePO4/C Powders Synthesized by Solution Combustion Method as the Lithium-Ion Batteries Cathode Material [Volume 11, Issue 1, 2022, Pages 81-93]
Electrochemical Stability
The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium [-2, 3*, 2009, Pages 263-271]
Electrochromic
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Electrodeposition
The Effect of Concentration of Calcium Phosphate Salts on Morphology and Nanostructure of Hydroxyapatite Coating on Titanium with Thermal - Electrodeposition Method [-1, 4*, 2010, Pages 285-292]
Electrodeposition
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Electrodeposition
The Effect of Temperature on the Electrowinning of Antimony from Alkaline Sulfide Solution [Volume 9, Issue 4, 2020, Pages 47-58]
Electrodeposition
Synthesis of Porous Nickel Foam Based on Electroless Plating on Polymeric Substrate and Electrodeposition [Volume 11, Issue 1, 2022, Pages 69-79]
Electrokinetic
Deposition pattern Of Tin Oxide Nanoparticles Under Non-uniform AC Electric Fields [Volume 5, Issue 1, 2016, Pages 11-16]
Electroless
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
Electroless
Synthesis of Porous Nickel Foam Based on Electroless Plating on Polymeric Substrate and Electrodeposition [Volume 11, Issue 1, 2022, Pages 69-79]
Electroless Ni-B
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Electroless Ni-P coating
Effect of roughness of the substrate on High-temperature wear behavior of electroless nickel-phosphorus coatings [Volume 2, Issue 3, 2013, Pages 24-30]
Electroless plating
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
Electrolyte
Investigation of Effect Electrolyte on Performance of Dye-Sensitized Solar Cells Based on Indoline Dyes [Volume 5, Issue 3, 2016, Pages 11-16]
Electrolyte
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Electrolyte
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Electromagnetic field
Photoimmobilization of Synthesized Photoreative Gelatin by Laser Irradiation for Applications of Photobiolithography and Cell Printing [Volume 2, Issue 2, 2013, Pages 87-97]
Electromagnetic Wave Absorber
Flexible Multicomponent Nanocomposite Cover for Efficient Absorption of Electromagnetic Waves [Volume 11, Issue 2, 2022, Pages 27-43]
Electron backscattered diffraction
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Electron Mobility
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Electrophoretic
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Electrophoretic deposition
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Electrophoretic deposition
Electrophoretic deposition of CoFe2O4 coating for solid oxide fuel cellinterconnects [Volume 2, Issue 1, 2013, Pages 11-19]
Electrophoretic deposition
Study the Effect of Different Electrodes, Suspension Conductivity and Cell Resistivity, on Yield of EPD in Nano Alumina Suspension [Volume 5, Issue 3, 2016, Pages 1-9]
Electrophoretic deposition
Deposition of Graphene Oxide Using Electrophoretic Method and Heat Treatment Temperature Effect on the Character of the Supercapacitor [Volume 5, Issue 3, 2016, Pages 41-50]
Electrophoretic deposition
Corrosion and Bonding Strength Enhancements in Bioglass Coating on CP-Ti by Using a Combination of Micro-arc Oxidation and Electrophoretic Deposition [Volume 6, Issue 1, 2017, Pages 61-69]
Electrophoretic deposition
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Electrophoretic deposition
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Electroplating
Fabrication Ohmic Contact of Ni/Cu Structure on Polycrystalline Silicon Via Electrochemical Method used in Solar Cells [-3, 2*, 2008, Pages 183-190]
Electroplating
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Electroplating
Effect of Tempertureon Properties and Corrosion Behavior of Electroplated Nickel- Graphene Composite Coating [Volume 4, Issue 4, 2015, Pages 19-26]
Electroplating
Evaluation of Corrosion Resistance of Ni-Co/Gr Nanocomposite Coating Applied on Carbon Steel Substrate by Electro-Deposition Method under Pulse-Reverse Current [Volume 11, Issue 3, 2022, Pages 43-55]
Electropolishing
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Electrospinning
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Electrospinning
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Electrospinning
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
Electrospinning
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Electrospinning
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Electrospinning
Synthesis and Characterization of Modified SiO2 Nanofibers to Evaluate the Release of Doxorubicin (DOX) Anticancer Drug [Volume 10, Issue 1, 2021, Pages 25-32]
Electrospinning
Effects of Rotating Drum and Polymer Concentration on Morphology of Electrospun TiO2/PVP Nanofibers [Volume 9, Issue 4, 2020, Pages 59-69]
Electrospinning
Synthesis and Characterization of Chitosan/Poly (Vinyl Alcohol) Polymer Nanofibers Containing Chicory Extract by Electrospun Method and Evaluation of Its Antibacterial Properties [Volume 11, Issue 4, 2022, Pages 31-44]
Energy distribution
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Energy Harvester
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Energy recovery
The Effect of Fill Ratio on Performance and Heat Transfer Coefficient of Thermosyphons Evaporator and Condenser [-2, 1*, 2009, Pages 40-50]
Engine oil
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Environment
Rapid and Cost-Effective Biosynthesis of Copper Oxide Nanoparticles and Its Application as an Efficient Catalyst for Dye Removal in Aqueous Media [Volume 9, Issue 4, 2020, Pages 23-34]
Epitaxial growth
Investigation of Microstructure and Ferroelectric Domain of Epitaxial PbTiO3 Thin Film Grown by Liquid Phase Deposition [Volume 9, Issue 2, 2020, Pages 73-79]
Epoxy
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
Equilibrium equations
Exact Method in Design of Circular Base Plate under Large Eccentric Loads [-3, 2*, 2008, Pages 191-206]
Ethylene glycol
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Eu2O3 Keyword 3
Investigation on densification, compaction and mechanical properties of Si3N4 composite [Volume 11, Issue 4, 2022, Pages 65-85]
Eutectic phases
Investigation on effect of die temperature and reheating treatment on microstructure of A360 aluminium alloy semi-solid forming [-1, 4*, 2010, Pages 341-347]
Exact Method
Exact Method in Design of Circular Base Plate under Large Eccentric Loads [-3, 2*, 2008, Pages 191-206]
Exciton
Effect of the PEDOT:PSS Thin Layer Coated on ITO Substrate on Two Layers Organic Solar Cells Properties Consist of Fullerene Copper Phtalocyanine [-1, 2*, 2010, Pages 117-122]
Explosive Welding
Effect of Stand-Off Distance on the Shape and Microstructure of the Interface of Three-Layer Explosive Welding Of Ms90 Brass / St14 Steel/Ms90 Brass [-2, 1*, 2009, Pages 83-92]
F
Fabrication method
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Fatigue life
Fatigue Behavior of Biomedical Titanium Ti-6Al-4V Alloy [Volume 3, Issue 3, 2014, Pages 67-77]
Fe3O4 nano-particles
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Feedstock
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
Feedstock
Investigating the Effect of Solid Load on The Process of Low-Pressure Injection Molding (LPIM) of Zirconia Parts [Volume 13, Issue 1, 2024, Pages 57-68]
Fe-FeS
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
Ferrite
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
Ferroelectric Domains
Investigation of Microstructure and Ferroelectric Domain of Epitaxial PbTiO3 Thin Film Grown by Liquid Phase Deposition [Volume 9, Issue 2, 2020, Pages 73-79]
Ferroelectrics
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Ferrotic
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
FE-SEM
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Fiber
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Fiber metal laminates
The Effect of Thermal Cycles on the Impact Performance of Carbon Fibers-Epoxy/Aluminum Fibers Metal Laminates [Volume 11, Issue 3, 2022, Pages 1-14]
Fill Ratio
The Effect of Fill Ratio on Performance and Heat Transfer Coefficient of Thermosyphons Evaporator and Condenser [-2, 1*, 2009, Pages 40-50]
Filter
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Finemet alloy
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Finite Element
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
Finite element method
Simulation of Developed Texture During Warm Rolling of IF Steel [Volume 13, Issue 1, 2024, Pages 1-11]
Finite-volume method
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Finite-volume method
Suppression of Vortex Shedding from Circular Cylinders Using Detached Short Splitter-Plates [-2, 3*, 2009, Pages 291-310]
Fish Bone
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Fixed bed reactor
Using of Granulated Nano-Hydroxyapatite to Absorb Cadmium from Aqueous Ssolutions in a fixed Bed Reactor [Volume 5, Issue 2, 2016, Pages 49-57]
Flavonoid
Formulation, Characterization and Evaluation of Quercetin-loaded Chitosan-functionalized Mesoporous Silica for Targeted Drug Delivery in Cancer Treatment [Volume 5, Issue 4, 2016, Pages 37-44]
Fluid control devices
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2013, Pages 11-23]
Fluid-elastic Instability
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
FMG Particles
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Folic acid
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
F/O ratio
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Force field
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Forecasting
Suggestion and Verification of a New Statistical Model for Wind Speed and Direction [-1, 2*, 2010, Pages 123-138]
Format Anion
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Formation Energy
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Formic acid
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
FP-LAPW
Determination of the Electronic Structure of α-Al2O3 with First Principle Study [-1, 2*, 2010, Pages 145-150]
FP-LAPW
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
Fractography
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Fracture behavior
Phase and Microstructural Evolutions and Fracture Behavior of Nimonic 75 Transient Liquid Phase Joints at Different Temperatures [Volume 9, Issue 3, 2020, Pages 37-49]
Fractured Shells
Effect of Precursor Concentration on the Microstructure of Aluminum Oxide Coating Made through the Solution Precursor Plasma Spray Process [Volume 11, Issue 1, 2022, Pages 1-12]
Fredholm integral equation
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Freeze casting
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
Friction Stir Processing
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Friction Stir Processing
The Effect of SiC Nanoparticles and Liquid Nitrogen Medium on Microstructure Evolutions of Severely Deformed Al During Friction Stir Processing [Volume 5, Issue 4, 2016, Pages 1-9]
Friction Stir Processing
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Friction stir spot welding
Assessment Of Dissimilar 6061-T6 Al/DP590 Dual Phase Steel Welds Produced Using Friction Stir Spot Welding [Volume 5, Issue 1, 2016, Pages 1-10]
Friction Stir Welding
Friction Stir Welding of Commercially Pure Aluminum Foams Manufactured by Accumulative Roll-Bonding Process [Volume 3, Issue 3, 2014, Pages 35-42]
Friction Stir Welding
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Friction welding
Influence of the AC Electrical Constant Current on the Aging Behavior of Al/Cu Bimetal [Volume 9, Issue 3, 2020, Pages 11-18]
FTIR
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Fuel cells
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Fullerene
Effect of the PEDOT:PSS Thin Layer Coated on ITO Substrate on Two Layers Organic Solar Cells Properties Consist of Fullerene Copper Phtalocyanine [-1, 2*, 2010, Pages 117-122]
Full Potential-Linearized Augmented Plane Wave (FP-LAPW)
Determination of the Electronic Structure and Density of Electronic States of Orthorhombic Lacro3 Ceramic in the Framework of Density Functional Theory (DFT) [-2, 4*, 2009, Pages 341-345]
Functionally graded coating (FGC)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Fused Silica
Effect of Sintering Temperature on Properties of Fused Silica- YSZ Composite Prepared by Spark Plasma Sintering [Volume 11, Issue 3, 2022, Pages 75-84]
Fusion method
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
G
Galocyanine
Determination of Vanadium by Optical Sensing Film [Volume 5, Issue 3, 2016, Pages 25-32]
Galvanostat
Anodizing Of Titanium in Acidic Electrolytes and Evaluation of Its Corrosion Resistance in PBS Physiologic Solution [-2, 1*, 2009, Pages 11-20]
Galvanostatic
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Gamma irradiation
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Gas-foaming
Preparation of Porous 45S5 Bioactive Glass by Gas Foaming [-1, 4*, 2010, Pages 319-330]
Gas pressure
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Gas Sensing
Synthesis of SnO2/ ZnO Core- Shell Nanocomposites via Sonochemical Method and Evaluation of their Gas Sensing Properties [Volume 5, Issue 2, 2016, Pages 25-30]
Gas Sensor
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Gas Sensor
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Gelatin
Fabrication and Evaluation of Physical and Biological Properties of Hydroxyethyl Cellulose/Hyaluronic Acid-Based Scaffolds Used for Second-Degree (Partial-Thickness) Burns Wounds Healing [Volume 9, Issue 4, 2020, Pages 35-46]
Gelatin
Preparation and Characterization of Microspheres Based on Gelatin-Sodium Alginate-Genipin by the Formation of Polyelectrolyte Complex [Volume 9, Issue 3, 2020, Pages 63-78]
Gelatin
Fabrication and Characterization of Gelatin/Chitosan/Zinc Oxide Nanocomposite Hydrogels Intended for Biomedical Applications [Volume 11, Issue 2, 2022, Pages 57-69]
Gelatin
The Effect of Adding Different Percentages of γ-Glycidoxypropyltrimethoxysilane Cross-linker on the Properties of Freeze-dried Gelatin/Chitosan Scaffolds upon Introducing an Optimum Condition to Cross-link the Chitosan/Gelatin Scaffolds in Bone Tissue Engineering [Volume 12, Issue 2, 2023, Pages 39-54]
Genipin
Preparation and Characterization of Microspheres Based on Gelatin-Sodium Alginate-Genipin by the Formation of Polyelectrolyte Complex [Volume 9, Issue 3, 2020, Pages 63-78]
GGA
Determination of the Electronic Structure of α-Al2O3 with First Principle Study [-1, 2*, 2010, Pages 145-150]
GGA
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
Gibbs Distribution
Efficient Approach for Image Segmentation Using the Concept of Pixon and Markov Random Field [-2, 3*, 2009, Pages 241-253]
Glass
Investigation and Manufacturing of Slag Glass Ceramic with High Mechanical Strength and Hardness in the Presence of Various Nucleating Agents [-4, 1*, 2007, Pages 1-12]
Glass
Investigation of Glass Preparation Using Processed Nepheline Syenite from Kaleybar, Iran [Volume 11, Issue 2, 2022, Pages 13-26]
Glass Ceramic
Investigation and Manufacturing of Slag Glass Ceramic with High Mechanical Strength and Hardness in the Presence of Various Nucleating Agents [-4, 1*, 2007, Pages 1-12]
Glass Ceramic
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Glass Ceramics
Production of Glass-Ceramics from Slag of Iron Alloyed Steel [Volume 2, Issue 2, 2013, Pages 23-31]
Glass ionomer
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Globular Microstructure
Study on the Formation of Globular Microstructure in 7075-Al alloy during Strain Induced Melt Activated (SIMA) process [Volume 5, Issue 4, 2016, Pages 19-28]
GO
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Goal Programming
MODM Model for Determining PM Requirements by Conflict of Maintenance System Reliability and Lean Thinking [-4, 1*, 2007, Pages 77-94]
Gold and Platinum Thin Film
Enhancing the Luminosity of Two-Dimensional Organic-Inorganic Hybrids with Coating by Gold and Platinum Thin Films at Low Temperatures [Volume 11, Issue 4, 2022, Pages 12-23]
Gradient
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Grain Size
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Gram negative bacteria
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
Gram positive bacteria
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
Graphite
Investigation Some Properties of Graphite for Using it as a Heating Element in High Temperature Vacuum Furnace [-4, 1*, 2007, Pages 25-30]
Graphite
Storage Of Hydrogen Fuel In Metal Impregneted Graphene [Volume 3, Issue 1, 2014, Pages 55-60]
Green method
Evaluation of Microstructural and Antibacterial Properties of Graphene Oxide Synthesized by Green Method [Volume 9, Issue 3, 2020, Pages 51-61]
Green Pesticide
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
Green synthesis
Rapid and Cost-Effective Biosynthesis of Copper Oxide Nanoparticles and Its Application as an Efficient Catalyst for Dye Removal in Aqueous Media [Volume 9, Issue 4, 2020, Pages 23-34]
GTAW
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
GTD-111 superalloy
The Effects of Homogenizing on the casting microstructure and hardness of GTD111 superalloy [Volume 6, Issue 4, 2017, Pages 25-32]
Gypsum plaster
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
H
Hadfield steel
Investigation of Aluminum Effect on the KIC and ac of Hadfield Hypereutectoid Steel By Using Impact Test Results [Volume 5, Issue 4, 2016, Pages 65-74]
Hadfield steel
Investigation of Joints Design Geometry Effects on the Microstructural Aspects and Corrosion Mechanism of Weld Metal in the Hadfield Steel Welding Joints [Volume 6, Issue 1, 2017, Pages 71-80]
Hadfield steel
Investigation of Titanium Effects on the Behavior and Corrosion Mechanism of Hadfield Steel By Using Electrochemical Tests and Electron Microscopy Studies [Volume 6, Issue 4, 2017, Pages 63-71]
Halo test
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
Handmade carpet
Examination of the effect of colloidalsilvernanoparticles on the fibers of handmade carpets dyed by madder dye against biological and natural factor [Volume 2, Issue 2, 2013, Pages 53-57]
Hardness
Effect of Cryotreatment on Microstructure and Wear Properties of Cold Work Tool D6 Steel [-3, 2*, 2008, Pages 137-152]
Hardness
Investigation of Mechanical Properties and Microstructure of WC-10%Wtco Containing Tac Grain Growth Inhibitor [-2, 4*, 2009, Pages 391-399]
Hardness
Effect of roughness of the substrate on High-temperature wear behavior of electroless nickel-phosphorus coatings [Volume 2, Issue 3, 2013, Pages 24-30]
Hardness
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
Hardness
Synthesis and Characterization of Al 7014 Nanostructure by Mechanical Alloying [Volume 3, Issue 3, 2014, Pages 79-87]
Hardness
Effect of addition of nano Magnesuim oxide on the mechanical properties of Alumina/ Silicon Carbides nano composites synthesized by mechanical alloying [Volume 5, Issue 1, 2016, Pages 45-49]
Hardness
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Hardness
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
Hardness
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Hardware Description Language
Improving the Performance of Signal Processor Unit in Cochlear Implants and Providing a Method for its Evaluation [-2, 4*, 2009, Pages 323-334]
Hartman number
Effect of Applying a Constant Magnetic Field on Transient Natural Convection in a Square Cavity and Investigation of Heat Lines [-1, 3*, 2010, Pages 233-248]
HAZ liquation cracking
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Heating Element
Investigation Some Properties of Graphite for Using it as a Heating Element in High Temperature Vacuum Furnace [-4, 1*, 2007, Pages 25-30]
Heat Transfer Coefficient
The Effect of Fill Ratio on Performance and Heat Transfer Coefficient of Thermosyphons Evaporator and Condenser [-2, 1*, 2009, Pages 40-50]
Heat treatment
The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium [-2, 3*, 2009, Pages 263-271]
Heat treatment
Investigating theEffect of Heat Treatment on Microstructure, Hardness andCorrosion Behavior of Nickel-Aluminum Bronze [Volume 2, Issue 1, 2013, Pages 71-80]
Heat treatment
Production of Glass-Ceramics from Slag of Iron Alloyed Steel [Volume 2, Issue 2, 2013, Pages 23-31]
Heat treatment
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Heat treatment
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Heat treatment
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
Heat treatment
Deposition of Graphene Oxide Using Electrophoretic Method and Heat Treatment Temperature Effect on the Character of the Supercapacitor [Volume 5, Issue 3, 2016, Pages 41-50]
Heat treatment
Investigation of Aluminum Effect on the KIC and ac of Hadfield Hypereutectoid Steel By Using Impact Test Results [Volume 5, Issue 4, 2016, Pages 65-74]
Heat treatment
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Heat treatment
The Effect P Content of High and Low Temperature Heat Treatment on the Properties of Ni-P-GO Electroless Nanocomposite Coating on Magnesium Alloy [Volume 10, Issue 1, 2021, Pages 33-44]
Heat treatment
Study on the Optical Properties of WS2 Thin Films Annealed in Various Atmospheres Including Ar, Ar/H2, NH3/H2O, and O2 [Volume 11, Issue 4, 2022, Pages 45-54]
Heavy metal
Role of Plants Rumex Pulcher and Verbascum Songaricum in Accumulation of some Heavy Metals in Sarcheshmeh Copper Mine, Iran [-3, 2*, 2008, Pages 129-136]
Heavy metals cations
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Height and disclination angles
The Effect of Height and Disclination Angle of Boron Nitride Nanocones on Electronic and Structural Properties: DFT [Volume 12, Issue 3, 2023, Pages 43-63]
Heterogeneous adsorbents
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Heterogeneous film
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Heterojunction
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
High Energy Milling
Investigation of Mechanical Properties and Microstructure of WC-10%Wtco Containing Tac Grain Growth Inhibitor [-2, 4*, 2009, Pages 391-399]
High Energy Planetary Milling
Synthesys of Cu-Al2O3 Metal Matrix Nano Composite From Cuo and Al Powders by Using High Energy Planetary Fast Milling [-2, 4*, 2009, Pages 401-410]
High entropy alloys
Microstructural Investigation of The Cast and Homogenized Al10Co25Cr8Fe15Ni36Ti6 High Entropy Alloy [Volume 13, Issue 1, 2024, Pages 46-56]
High speed milling
The effect of volume percent of SiC reinforcement phase on the morphology and microstructure of nano aluminum composite powders made by mechanical alloying [Volume 2, Issue 1, 2013, Pages 39-47]
High strength
Investigation of Effective Parameters on The Properties Of The High Strong Chamotte Based Low –Cement Refractory Castable [-1, 3*, 2010, Pages 225-231]
High temperature and pressure
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Homogenization
Microstructural Investigation of The Cast and Homogenized Al10Co25Cr8Fe15Ni36Ti6 High Entropy Alloy [Volume 13, Issue 1, 2024, Pages 46-56]
Homogenizing
The Effects of Homogenizing on the casting microstructure and hardness of GTD111 superalloy [Volume 6, Issue 4, 2017, Pages 25-32]
Hot extrusion
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Hot press
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Hot press
Fabrication of Al2O3-B4C Nanocomposite via Ball Milling, Subsequent Self-Propagation High-Temperature Synthesis, and Final Hot Pressing [Volume 9, Issue 4, 2020, Pages 1-11]
Hot pressing
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
Human blood plasma
Effect of adding nano-titania on mechanical properties and hydroxyapatit formation of calcium phosphate cement in human blood plasma [Volume 2, Issue 1, 2013, Pages 21-28]
HVOF
Investigation of Oxidation Mechanism of HVOF-CoNiCrAlY Coating in Early Stages of Application [Volume 5, Issue 4, 2016, Pages 53-63]
HVOF Thermal Spray
Evaluation of Microstructure and Wear Behavior of Iron-Titanium Composition Coating Applied by HVOF Process [Volume 9, Issue 4, 2020, Pages 13-21]
Hyaluronic acid
Fabrication and Evaluation of Physical and Biological Properties of Hydroxyethyl Cellulose/Hyaluronic Acid-Based Scaffolds Used for Second-Degree (Partial-Thickness) Burns Wounds Healing [Volume 9, Issue 4, 2020, Pages 35-46]
Hybrid Nanogenerator
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Hybrid Sol-Gel coating
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
Hydrodynamic Interactions
Hydrodynamic Interactions between Two Micro-Swimmers [-1, 2*, 2010, Pages 139-143]
Hydrogel
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Hydrogel
Fabrication and Characterization of Gelatin/Chitosan/Zinc Oxide Nanocomposite Hydrogels Intended for Biomedical Applications [Volume 11, Issue 2, 2022, Pages 57-69]
Hydrogen Adsorption
Storage Of Hydrogen Fuel In Metal Impregneted Graphene [Volume 3, Issue 1, 2014, Pages 55-60]
Hydrogen desorption temperature
Effect of Ce-Ni alloy Addition on Hydrogen Desorption Temperature of Magnesium Hydride-Based Composite Produced by Mechanical Alloying [Volume 6, Issue 1, 2017, Pages 43-52]
Hydrogen Embrittlement
Effect of Alloying Elements on Hydrogen diffusion in dissimilar joint of Austenitic stainless steel/Carbon steel [Volume 2, Issue 3, 2013, Pages 50-59]
Hydrogen evolution reaction
Deposition of Molybdenum disulfide nanosheets on carbon cloth by electrophoretic method and their performance in hydrogen evolution reaction [Volume 9, Issue 1, 2020, Pages 11-17]
Hydrogen-reduction
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Hydrogen storage
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Hydrogen Storage Alloys
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Hydrophobic
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
Hydrothemal Synthesis
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
Hydrothermal
Synthesis of Single-Crystalline Zinc Oxide Nanorods via Hydrothermal Processing [-2, 1*, 2009, Pages 51-56]
Hydrothermal
Hydrothermal Synthesis of Nano Zns: An Investigation about the Effects of Synthesis Period on Particles Morphologies [-1, 3*, 2010, Pages 267-273]
Hydrothermal Condition
Chemical Synthesis and Characterization of Physical and Magnetic Properties of Cobalt Doped Hydroxyapatite Nanoparticles [Volume 5, Issue 2, 2016, Pages 1-8]
Hydrothermal method
Synthesis, Characterization and Electrochemical Performance of Nanostructured Cobalt Oxide and Nickel Cobalt Oxide Active Materials for Supercapacitors [Volume 6, Issue 3, 2017, Pages 61-68]
Hydrothermal route
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Hydrothermal Synthesis
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
Hydroxide film
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Hydroxyapatite
Synthesis and Characterization of Dandelion-Like Hydroxyapatite Via a Miclle-Directed Hydrothermal Method [-2, 3*, 2009, Pages 255-262]
Hydroxyapatite
The Effect of Concentration of Calcium Phosphate Salts on Morphology and Nanostructure of Hydroxyapatite Coating on Titanium with Thermal - Electrodeposition Method [-1, 4*, 2010, Pages 285-292]
Hydroxyapatite
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Hydroxyapatite
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Hydroxyapatite
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Hydroxyapatite
Chemical Synthesis and Characterization of Physical and Magnetic Properties of Cobalt Doped Hydroxyapatite Nanoparticles [Volume 5, Issue 2, 2016, Pages 1-8]
Hydroxyapatite
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Hydroxyapatite
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Hydroxyapatite
Mechanism of Strontium Adsorption on Nanostructured Hydroxyapatite in an Aqueous Solution [Volume 11, Issue 1, 2022, Pages 23-34]
Hydroxyapatite
Hydroxyapatite Bioceramic Heat Transfer Comparison in Water and Simulated Body Fluid after Addition of Carbon Nanotube [Volume 11, Issue 1, 2022, Pages 95-105]
Hydroxyapatite (HA)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Hydroxyethyl Cellulose
Fabrication and Evaluation of Physical and Biological Properties of Hydroxyethyl Cellulose/Hyaluronic Acid-Based Scaffolds Used for Second-Degree (Partial-Thickness) Burns Wounds Healing [Volume 9, Issue 4, 2020, Pages 35-46]
I
III) Oxide(Co3O4)
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
Ilmenite
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Image Segmentation
Efficient Approach for Image Segmentation Using the Concept of Pixon and Markov Random Field [-2, 3*, 2009, Pages 241-253]
Immobilization
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Impact behavior
The Effect of Thermal Cycles on the Impact Performance of Carbon Fibers-Epoxy/Aluminum Fibers Metal Laminates [Volume 11, Issue 3, 2022, Pages 1-14]
IN718 Superalloy
The Effect of Cooling Rate After Full Solution and Aging Time on Microstructure and Hardness of IN718 Superalloy Fabricated via SLM [Volume 10, Issue 2, 2021, Pages 1-11]
Inconel 718 alloy
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Inconel X-750
Investigation of Morphology and Particle Size of γ' in Nickel Base Superalloy X-750 under Different Aging Temperatures [Volume 9, Issue 2, 2020, Pages 43-51]
Indoline
Investigation of Effect Electrolyte on Performance of Dye-Sensitized Solar Cells Based on Indoline Dyes [Volume 5, Issue 3, 2016, Pages 11-16]
Inexpensive Material
Investigation and Manufacturing of Slag Glass Ceramic with High Mechanical Strength and Hardness in the Presence of Various Nucleating Agents [-4, 1*, 2007, Pages 1-12]
Infrared Spectroscopy (FTIR)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Inhibitor
Comparison of Corrosion Behavior of 1.4361 Si-Alloyed and 316 Austenitic Stainless Steels in Nitric Acid Based Propellant [Volume 4, Issue 2, 2015, Pages 19-26]
Inhibitor
Effect of Anise Extract as Green Corrosion Inhibitor Carbon Steel in CO2-Containing Salt [Volume 4, Issue 2, 2015, Pages 37-46]
Injection Molding
Fabrication of Alumina Parts Using Injection Molding [-1, 4*, 2010, Pages 349-356]
Injection Molding Process
Studying of the Effect of Surfactant and Reinforcement on Rheological Properties of Mg Matrix Composite Feedstock [Volume 2, Issue 2, 2013, Pages 11-21]
InP/ZnS quantum dots
Functionalized InP/ZnS Quantum Dots Synthesis for Applications in Drug Delivery Systems [Volume 6, Issue 2, 2017, Pages 55-63]
In situ polymerization
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
In-situ sintering
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Interconnect
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Interconnect
Electrophoretic deposition of CoFe2O4 coating for solid oxide fuel cellinterconnects [Volume 2, Issue 1, 2013, Pages 11-19]
Intermetallic phases
Influence of the AC Electrical Constant Current on the Aging Behavior of Al/Cu Bimetal [Volume 9, Issue 3, 2020, Pages 11-18]
Intermix
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2013, Pages 11-23]
Interpass Temperature
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Interpore Distance
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Intrinsic Layers)
Simulation and Optimization of Bifacial Solar Cells with a Hetero-Junction MicroCrystalline Intrinsic thin layer [Volume 5, Issue 2, 2016, Pages 41-48]
Ion beam deposition
Investigating of Structural Evolution of Diamond-Like Carbon Thin Film Applied by Ion Beam Deposition Technology under the Effect of Substrate Temperature [Volume 11, Issue 3, 2022, Pages 31-42]
Ionic Liquid
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
ION/IOFF ratio
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
Iranian Clay
Mullite Phase Synthesis and Initial Density on the Physical Properties with the Help of Microwave Heating [-2, 1*, 2009, Pages 67-71]
Iron
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Iron-Nitrogen
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
Iron Particles
Recycling of Deformed Powder from Submerge Arc Welding (SAW) [-3, 2*, 2008, Pages 115-127]
K
K2O additive
Investigation into the Processing of Transparent Oxyfluoride Glass and Glass Ceramics Containing CaF2 Nanocrystals in Presence of K2O Additive [Volume 4, Issue 3, 2015, Pages 1-7]
Kaolin-Zein composite
Methylene Blue Removal from Aqueous Solution Using Zein-Modified Kaolin [Volume 9, Issue 2, 2020, Pages 53-61]
K-Carrageenan
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
Keywords: acetyl acetone
The Effect of acetyl acetone on the sol-gel synthesis of tetragonal zirconia nanopowder [Volume 2, Issue 2, 2013, Pages 1-10]
Keywords: Keyword 1
Investigation on densification, compaction and mechanical properties of Si3N4 composite [Volume 11, Issue 4, 2022, Pages 65-85]
KIC and ac
Investigation of Aluminum Effect on the KIC and ac of Hadfield Hypereutectoid Steel By Using Impact Test Results [Volume 5, Issue 4, 2016, Pages 65-74]
Kinetic
The Effect of Temperature on the Electrowinning of Antimony from Alkaline Sulfide Solution [Volume 9, Issue 4, 2020, Pages 47-58]
Kinetic of reaction
The Study of kinetic Reaction of the Photocatalytic Elimination of Methyl Orange in the presence of Magnetic Composite of Fe3O4-ZnO Based on Graphene Oxide [Volume 9, Issue 1, 2020, Pages 49-56]
Kinetics
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Kinetics
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
Kinetics
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
Knowledge
Development of Knowledge Management by Using of Human Resource Management Process [-2, 1*, 2009, Pages 1-10]
Knowledge Management
Development of Knowledge Management by Using of Human Resource Management Process [-2, 1*, 2009, Pages 1-10]
KOH Environment
Evaluation the Role of Carbon in the Polarization Resistance of Silver Electrodes Used in the Silver Oxide-Zinc Cells [Volume 5, Issue 3, 2016, Pages 33-40]
L
Lacro3 Ceramic
Determination of the Electronic Structure and Density of Electronic States of Orthorhombic Lacro3 Ceramic in the Framework of Density Functional Theory (DFT) [-2, 4*, 2009, Pages 341-345]
Lanthanum
Removal of Phosphate from Aqueous Media by Lanthanum Modified Nanochitosan [Volume 9, Issue 2, 2020, Pages 9-18]
Laser Beam Welding
Effects of Nd: YAG Pulsed Laser Beam Parameters on Microstructure and Dimensions of Weld Pool for a Copper-Beryllium Plate [-3, 2*, 2008, Pages 207-216]
Lattice Constant
Calculation of the structure parameters of Tin dioxide in CaCl2 phase [-2, 1*, 2009, Pages 57-65]
Lead Titanate
Investigation of Microstructure and Ferroelectric Domain of Epitaxial PbTiO3 Thin Film Grown by Liquid Phase Deposition [Volume 9, Issue 2, 2020, Pages 73-79]
Lead titanate nanopowder
Synthesis of Lead Titanate Nanostructure by Mechanical Activation Method and Evaluating of its Photocatalytic Decolorization of Methyl orange [Volume 5, Issue 1, 2016, Pages 33-44]
Lead titanateziconate
Synthesis of Lead TitanateZirconate Nano Powders via Sol-Gel Process and Investigation of DielectricProperties of the Sintered Pellets [Volume 2, Issue 1, 2013, Pages 49-54]
Leakage
Design and Simulation of AlGaN/GaN High Electron Mobility Field-Effect Diode [Volume 10, Issue 2, 2021, Pages 59-69]
Lean
MODM Model for Determining PM Requirements by Conflict of Maintenance System Reliability and Lean Thinking [-4, 1*, 2007, Pages 77-94]
Li2TiO3
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Li-Air Battery
The Effect of Modified Cathode with Carbon/CuFe2O4 Nanocatalyst and Electrolyte of 1-Hexyl-3-Methylimidazolium Chloride ([Hmim][Cl]) on the Performance and Lifetime of Lithium-Air Battery [Volume 9, Issue 3, 2020, Pages 27-35]
Li-Excess
Optimization of Li-Excess Content on the Performance of Lix(Ni0.3Mn0.5Co0.2)O2 Cathode Materials in Li-ion Battery [Volume 9, Issue 1, 2020, Pages 1-10]
LiFePO4
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
LiFePO4
Electrochemical Performance of LiFePO4/C Powders Synthesized by Solution Combustion Method as the Lithium-Ion Batteries Cathode Material [Volume 11, Issue 1, 2022, Pages 81-93]
LiFeSO4F
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Lifetime
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Light-cure resin
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Light weight concrete
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Li-ion
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Linear Regularization
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Line Tension
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Li Ni0.5Mn0.3Co0.2 cathode powder
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Linseed oil
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Lipase
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Liquid Nitrogen
The Effect of SiC Nanoparticles and Liquid Nitrogen Medium on Microstructure Evolutions of Severely Deformed Al During Friction Stir Processing [Volume 5, Issue 4, 2016, Pages 1-9]
Liquid phase sintering
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Liquid phase sintering
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Lithium aluminosilicate
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Lithium Disilicate؛ Microstructure؛ Crystalline Phase
Effects Kind of Nucleation Agent Particle Size on the Crystalline Phases and Microstructure of Glass-Ceramics for Dentistry Applications [-2, 4*, 2009, Pages 379-390]
Lithium-ion
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Lithium-ion
A comprehensive theoretical study of Li2FeSiO4 polymorphs as Li-ion batteries cathode materials: DFT evaluations [Volume 7, Issue 2, 2018, Pages 63-74]
Lithium ion battery
Synthesis and Characterization of LiNi0.5Co0.2Mn0.3O2 as a Cathode Material for Lithium Ion Batteries and Investigating the Effect of Calcination Temperature on Electrochemical Performance of Cathode [Volume 9, Issue 1, 2020, Pages 67-76]
Lithium ion battery
Optimization of Li-Excess Content on the Performance of Lix(Ni0.3Mn0.5Co0.2)O2 Cathode Materials in Li-ion Battery [Volume 9, Issue 1, 2020, Pages 1-10]
Lithium ion battery
Electrochemical Performance of LiFePO4/C Powders Synthesized by Solution Combustion Method as the Lithium-Ion Batteries Cathode Material [Volume 11, Issue 1, 2022, Pages 81-93]
Lithium-ion battery
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Lithium-sulfur battery
Synthesis, characterization and cyclability of sulfur-polypyrrole composite as a cathode material for lithium secondary batteries [Volume 2, Issue 3, 2013, Pages 79-85]
Lorentz force
Effect of Applying a Constant Magnetic Field on Transient Natural Convection in a Square Cavity and Investigation of Heat Lines [-1, 3*, 2010, Pages 233-248]
Low cement
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Low cement
Investigation of Effective Parameters on The Properties Of The High Strong Chamotte Based Low –Cement Refractory Castable [-1, 3*, 2010, Pages 225-231]
Low-cement
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Low coefficient of thermal expansion
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Low temperature
Enhancing the Luminosity of Two-Dimensional Organic-Inorganic Hybrids with Coating by Gold and Platinum Thin Films at Low Temperatures [Volume 11, Issue 4, 2022, Pages 12-23]
M
Machinability
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
Macrodilution
Evaluation of the Effect of Titanium Dioxide Nanoparticles on MDR Bacteria In Vitro and Male Wistar Rats Liver In Vivo [Volume 11, Issue 1, 2022, Pages 55-68]
Macro porous
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
Madder
Examination of the effect of colloidalsilvernanoparticles on the fibers of handmade carpets dyed by madder dye against biological and natural factor [Volume 2, Issue 2, 2013, Pages 53-57]
Magnesia-Graphite Refractories
Effect of Composition and Sintering Temperature on PermanentLinear Change of Alumina-Magnesia-Graphite Refractories Using Box-Behnken Experimental Design [-2, 4*, 2009, Pages 355-368]
Magnesium biodegradable scaffold
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Magnesium hydride
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Magnesium Hydroxyapatite
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Magnesium Oxy Chloride Cement
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Magnetic field
Numerical Study of Effect of Applying a Magnetic Field on Natural Convection in a Tilted Square Cavity with Constant Temperature Sidewalls [-1, 3*, 2010, Pages 249-265]
Magnetic field
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Magnetic Graphene
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Magnetic nanoparticles
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Magnetic properties
Investigation the Radar Absorption Behavior of Polymer Matrix Composites with Doped Barium Hexaferrite Particles [Volume 5, Issue 3, 2016, Pages 17-23]
Magnetic properties
Thermo mechano-chemical synthesis, physical characterization and magnetic properties of Co-Mg-ferrite nanoparticles [Volume 7, Issue 2, 2018, Pages 1-6]
Magnetic properties
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Magnetic saturation
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Magnetite
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Magnetite
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
Magnetite
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Magnetron Sputtering Corrosion
Investigation of Properties of TiO2/MgO Dual Layer Thin Film Formed by Magnetron Sputtering on Mg Alloy [Volume 9, Issue 3, 2020, Pages 1-9]
Management Human Resources
Development of Knowledge Management by Using of Human Resource Management Process [-2, 1*, 2009, Pages 1-10]
Manganese hexacyanoferrate
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Manganese Oxide Nanoparticles
Synthesis of Manganese Oxide Nanoparticles Using Thermal Decomposition Method [Volume 9, Issue 1, 2020, Pages 57-65]
Markov Random Field
Efficient Approach for Image Segmentation Using the Concept of Pixon and Markov Random Field [-2, 3*, 2009, Pages 241-253]
MASHS
Synthesis of nanocomposite based on Nb2AlC ternary compound with Al2O3 reinforcing via SHS and MASHS [Volume 2, Issue 2, 2013, Pages 33-37]
MASHS
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
Mathematical Modeling
Experimental/theoretical Study on the Effect of Particles Size on Carbothermal Reduction of ZnO [Volume 3, Issue 4, 2014, Pages 35-41]
MCM-41
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Mean Free Path
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Mechanical activation
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
Mechanical activation
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Mechanical activation
Synthesis of Lead Titanate Nanostructure by Mechanical Activation Method and Evaluating of its Photocatalytic Decolorization of Methyl orange [Volume 5, Issue 1, 2016, Pages 33-44]
Mechanical and thermodynamic properties
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Mechanical coating technique (MCT)
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Mechanical milling
Synthesys of Cu-Al2O3 Metal Matrix Nano Composite From Cuo and Al Powders by Using High Energy Planetary Fast Milling [-2, 4*, 2009, Pages 401-410]
Mechanical milling
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Mechanical milling
Microstructural Evolution of Nanostructured Al-Mg Powder System During Ball Milling and Post Heat Treatment Processes [Volume 6, Issue 2, 2017, Pages 35-43]
Mechanical milling
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Mechanical properties
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
Mechanical properties
Effect of Pore Content on Mechanical Properties of Porous Nitinol under Compressive Loading [Volume 2, Issue 2, 2013, Pages 45-52]
Mechanical properties
The effect of graphene percent on mechanical properties of Cu/graphene nanocomposites [Volume 3, Issue 1, 2014, Pages 37-43]
Mechanical properties
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Mechanical properties
Effect of addition of nano Magnesuim oxide on the mechanical properties of Alumina/ Silicon Carbides nano composites synthesized by mechanical alloying [Volume 5, Issue 1, 2016, Pages 45-49]
Mechanical properties
Development of Nanostructured Bainitic Steel by Utilizing the Two Steps Austempering Heat Ttreatment [Volume 5, Issue 4, 2016, Pages 11-17]
Mechanical properties
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
Mechanical properties
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Mechanical properties
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Mechanical properties
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Mechanical properties
Fabrication of Cordierite Glass Ceramic with the Use of Silicone Resin and Investigating Its Mechanical Properties [Volume 9, Issue 2, 2020, Pages 63-71]
Mechanical properties
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
Mechanical properties
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Mechanical Strength
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Mechanical Strength
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Mechanism
Mechanism of Strontium Adsorption on Nanostructured Hydroxyapatite in an Aqueous Solution [Volume 11, Issue 1, 2022, Pages 23-34]
Mechanochemical
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Mechnical Properties
Effect of Sintering Temperature on Properties of Fused Silica- YSZ Composite Prepared by Spark Plasma Sintering [Volume 11, Issue 3, 2022, Pages 75-84]
Medium Carbon Steels
Development of Nanostructured Bainitic Steel by Utilizing the Two Steps Austempering Heat Ttreatment [Volume 5, Issue 4, 2016, Pages 11-17]
Melting method
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Melt spin
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Membrane
Preparation and Characterization of Nanostructure Titania Colloidal Membranes [-3, 2*, 2008, Pages 163-174]
Mesenchymal stem cell
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
Mesoporous silica materials
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Metal-assisted chemical etching
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Metallurgical Properties
Preparation and Evaluation of Nanostructured Neodymium Titanate via Chemical Method [-1, 2*, 2010, Pages 107-115]
Metal Matrix Composite
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2013, Pages 42-49]
Metal Matrix Composite
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Metal organic framework
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Metal Slag
Investigation and Manufacturing of Slag Glass Ceramic with High Mechanical Strength and Hardness in the Presence of Various Nucleating Agents [-4, 1*, 2007, Pages 1-12]
Methanol
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Methylene blue
Methylene Blue Removal from Aqueous Solution Using Zein-Modified Kaolin [Volume 9, Issue 2, 2020, Pages 53-61]
Methyl Orange
Synthesis of Lead Titanate Nanostructure by Mechanical Activation Method and Evaluating of its Photocatalytic Decolorization of Methyl orange [Volume 5, Issue 1, 2016, Pages 33-44]
Mg-Al2O3composite
Studying of the Effect of Surfactant and Reinforcement on Rheological Properties of Mg Matrix Composite Feedstock [Volume 2, Issue 2, 2013, Pages 11-21]
Mg Alloy
Investigation of Properties of TiO2/MgO Dual Layer Thin Film Formed by Magnetron Sputtering on Mg Alloy [Volume 9, Issue 3, 2020, Pages 1-9]
MgH2
Effect of Ce-Ni alloy Addition on Hydrogen Desorption Temperature of Magnesium Hydride-Based Composite Produced by Mechanical Alloying [Volume 6, Issue 1, 2017, Pages 43-52]
MgO
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
MICA
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
Microalloy Steel
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
Micro-arc oxidation
Corrosion and Bonding Strength Enhancements in Bioglass Coating on CP-Ti by Using a Combination of Micro-arc Oxidation and Electrophoretic Deposition [Volume 6, Issue 1, 2017, Pages 61-69]
Microcapsule
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
Micro-Composite
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
Microencapsulation
An Overview of Different Types of Self-Healing Concrete Construction Methods [Volume 11, Issue 1, 2022, Pages 35-53]
Microporosity
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Micro Silica
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Microsphere
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Microsphere
Preparation and Characterization of Microspheres Based on Gelatin-Sodium Alginate-Genipin by the Formation of Polyelectrolyte Complex [Volume 9, Issue 3, 2020, Pages 63-78]
Microstructural Properties
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Microstructure
Investigating theEffect of Heat Treatment on Microstructure, Hardness andCorrosion Behavior of Nickel-Aluminum Bronze [Volume 2, Issue 1, 2013, Pages 71-80]
Microstructure
The effect of sintering temperature on microstructure and microwave dielectric properties of 0.88Ba([Zn0.6Co0.4]1/3,Nb2/3)O3–0.1Ba(Ga1/2Ta1/2)O3–0.02BaZrO3 ceramics [Volume 2, Issue 4, 2013, Pages 35-42]
Microstructure
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
Microstructure
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Microstructure
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
Microstructure
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
Microstructure
The Influence of Different Heat Treatments on the Phase Transformation Temperatures of API-X70 Steel Containing Banded Structure [Volume 4, Issue 4, 2015, Pages 55-62]
Microstructure
Investigation of severe plastic deformation effect on microstructure of Ti-6Al-4V alloy [Volume 5, Issue 1, 2016, Pages 59-64]
Microstructure
Reinforcement and Annealing Effect on Microstructural Properties of Al-10Mg/Al21O3 Nanocomposites Prepared with Mechanical Alloying
Techniques [Volume 5, Issue 2, 2016, Pages 17-23]
Microstructure
Investigation of Aluminum Effect on the KIC and ac of Hadfield Hypereutectoid Steel By Using Impact Test Results [Volume 5, Issue 4, 2016, Pages 65-74]
Microstructure
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Microstructure
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Microstructure
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
Microstructure
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Microstructure
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Microstructure
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Microstructure
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Microstructure
The Effect of Cooling Rate After Full Solution and Aging Time on Microstructure and Hardness of IN718 Superalloy Fabricated via SLM [Volume 10, Issue 2, 2021, Pages 1-11]
Microstructure
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Microstructure
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Microstructure
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Microstructure
Microstructural Investigation of The Cast and Homogenized Al10Co25Cr8Fe15Ni36Ti6 High Entropy Alloy [Volume 13, Issue 1, 2024, Pages 46-56]
Microstructure analysis
Enhanced mechanical properties of pure aluminum by friction stir processing [Volume 7, Issue 2, 2018, Pages 7-17]
Microstruture
Effect of Cryotreatment on Microstructure and Wear Properties of Cold Work Tool D6 Steel [-3, 2*, 2008, Pages 137-152]
Micro-Swimmer
Hydrodynamic Interactions between Two Micro-Swimmers [-1, 2*, 2010, Pages 139-143]
Microwave
Microstructure Evaluation of Al-Mg-Sic Composite through Sintering by Microwave and Electrical Furnace [-2, 3*, 2009, Pages 219-230]
Microwave
Investigation of Addition of CNT and Sintering Process on Microstructure and Mechanical Properties of Al-Si3N4-CNT Nano Composite [Volume 9, Issue 1, 2020, Pages 39-48]
Microwave absorption
Synthesis of the Microwave Absorber Fe3O4/CFs Nanocomposite Via Electrophoretic Deposition With a Wide Effective Absorption Bandwidth [Volume 6, Issue 3, 2017, Pages 17-26]
Microwave absorption
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Microwave sintering
Mullite Phase Synthesis and Initial Density on the Physical Properties with the Help of Microwave Heating [-2, 1*, 2009, Pages 67-71]
Microwave sintering
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2013, Pages 42-49]
Microwave sintering
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Mild steel
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Milling
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Milling
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Mineral
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
Mineral Admixtures
An Overview of Different Types of Self-Healing Concrete Construction Methods [Volume 11, Issue 1, 2022, Pages 35-53]
Mischmetal
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Mixed Metal Oxide Coating
The Effect of Calcinations Parameters on the Stability of (10Ti–20Ru–70Sn)O2 Coating on Ti in Chloralkali Medium [-2, 3*, 2009, Pages 263-271]
Mixing model
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2013, Pages 11-23]
Mo2.85Al1.91Si4.81
Effect of Si by Al on Phase-Transformation and Microstructure of
MoSi2 based Compounds Synthesized by SHS Method [-4, 1*, 2007, Pages 51-58]
Modeling
Suggestion and Verification of a New Statistical Model for Wind Speed and Direction [-1, 2*, 2010, Pages 123-138]
Modeling
Investigation of Thermal Stresses in Micro and Nano-Structured Thermal Barrier Coatings [Volume 3, Issue 3, 2014, Pages 27-33]
Modeling
Fabrication of Dye sensitized solar cell by spherical and Nano pore TiO2 structure [Volume 3, Issue 3, 2014, Pages 43-47]
Modes of electrodeposition
Effect of Different Types of Electrochemical Methods on the Super Capacitor Properties of Thin Graphene Oxide Reduced by Electrochemical Method [Volume 9, Issue 2, 2020, Pages 35-42]
MODM
MODM Model for Determining PM Requirements by Conflict of Maintenance System Reliability and Lean Thinking [-4, 1*, 2007, Pages 77-94]
Molecular Dynamics Simulation
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Molecular Dynamics Simulation
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Molecular Dynamics Simulation
Crack Propagation in nanocrystalline Iron-Nitrogen via Molecular Dynamics Simulation [Volume 7, Issue 1, 2018, Pages 65-74]
Molecular structure
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Molybdenum disulfide nanosheets
Deposition of Molybdenum disulfide nanosheets on carbon cloth by electrophoretic method and their performance in hydrogen evolution reaction [Volume 9, Issue 1, 2020, Pages 11-17]
Monte Carlo simulation
The Effect of Pore Structure on the Adsorption and Storage of Hydrogen in Nanozeolite [-2, 4*, 2009, Pages 347-354]
MoOx
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Mo(Si
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
MoSi2
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
MoSi2
Effect of Si by Al on Phase-Transformation and Microstructure of
MoSi2 based Compounds Synthesized by SHS Method [-4, 1*, 2007, Pages 51-58]
MoSi2
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
Ms 90 Brass
Effect of Stand-Off Distance on the Shape and Microstructure of the Interface of Three-Layer Explosive Welding Of Ms90 Brass / St14 Steel/Ms90 Brass [-2, 1*, 2009, Pages 83-92]
MSR
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Mullite
Mullite Formation by Direct Oxidation Method in Al2O3+Si Al+SiO2 and Al+Si Systems [-4, 1*, 2007, Pages 31-44]
Mullite
Mullite Phase Synthesis and Initial Density on the Physical Properties with the Help of Microwave Heating [-2, 1*, 2009, Pages 67-71]
Mullite
An Investigation on the Fabrication and Properties of Ultra Low Cement Cordierite Mullite Refractory Castables [-1, 4*, 2010, Pages 309-317]
Mullite
Properties, type and amount of the final phases of alumina-zircon [Volume 5, Issue 1, 2016, Pages 25-32]
Mullite
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Mullitization
Mullite Phase Synthesis and Initial Density on the Physical Properties with the Help of Microwave Heating [-2, 1*, 2009, Pages 67-71]
Multicomponent Nanocomposite
Flexible Multicomponent Nanocomposite Cover for Efficient Absorption of Electromagnetic Waves [Volume 11, Issue 2, 2022, Pages 27-43]
Multicrystalline Silicon
Effect of Aging on the Electrical Conductivity of Tin Oxide Thick Film in Presence of Ethanol [-4, 1*, 2007, Pages 95-105]
Multiple Drug Resistant (MDR)
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Multi Step Martensitic Transformations
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Multi-walled carbon nanotubes
Enhanced Biomineralization of Stem Cells and Adsorption of Extracellular Matrix Proteins on Bioactive Scaffold Reinforced with Carboxylated Multi-Walled Carbon Nanotubes [Volume 10, Issue 4, 2021, Pages 89-106]
N
Na Alginate
Preparation and Characterization of Microspheres Based on Gelatin-Sodium Alginate-Genipin by the Formation of Polyelectrolyte Complex [Volume 9, Issue 3, 2020, Pages 63-78]
Nanocarriers
Formulation, Characterization and Evaluation of Quercetin-loaded Chitosan-functionalized Mesoporous Silica for Targeted Drug Delivery in Cancer Treatment [Volume 5, Issue 4, 2016, Pages 37-44]
Nano-catalyst
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
Nanoclay
Improvement of Practical Properties of Wood Polymer Composite with Nanoclay Particles [-2, 4*, 2009, Pages 369-377]
Nano-Complex
Synthesis and Characterization of Hydrogel Loaded Curcumin Encapsulated Chitosan Nanoparticles as Novel Wound Dressing [Volume 7, Issue 1, 2018, Pages 53-63]
Nano composite
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
Nano composite
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Nano composite
Effect of addition of nano Magnesuim oxide on the mechanical properties of Alumina/ Silicon Carbides nano composites synthesized by mechanical alloying [Volume 5, Issue 1, 2016, Pages 45-49]
Nano composite
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Nanocomposite
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Nanocomposite
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Nanocomposite
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
Nanocomposite
The effect of volume percent of SiC reinforcement phase on the morphology and microstructure of nano aluminum composite powders made by mechanical alloying [Volume 2, Issue 1, 2013, Pages 39-47]
Nanocomposite
Synthesis of nanocomposite based on Nb2AlC ternary compound with Al2O3 reinforcing via SHS and MASHS [Volume 2, Issue 2, 2013, Pages 33-37]
Nanocomposite
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
Nanocomposite
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Nanocomposite
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Nanocomposite
Synthesis of SnO2/ ZnO Core- Shell Nanocomposites via Sonochemical Method and Evaluation of their Gas Sensing Properties [Volume 5, Issue 2, 2016, Pages 25-30]
Nanocomposite
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
Nanocomposite
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Nanocomposite
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Nanocomposite
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Nanocomposite
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Nanocomposite
Evaluation of Corrosion Resistance of Ni-Co/Gr Nanocomposite Coating Applied on Carbon Steel Substrate by Electro-Deposition Method under Pulse-Reverse Current [Volume 11, Issue 3, 2022, Pages 43-55]
Nanocomposite
Fabrication and Characterization of L-Glutamine-Functionalized Magnetic Graphene Oxide as a Novel Bio-Platform for Controlled Release of 5-Fluorouracil [Volume 12, Issue 4, 2023, Pages 24-37]
Nanocomposite
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
Nano composite coating
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Nanocomposites
Investigation of magnetic and electrical properties of Cu30-Ni70/CNT nanocomposite produced by mechanical alloying [Volume 3, Issue 1, 2014, Pages 29-36]
Nanocomposites
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Nanocomposites
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Nanocomposites
Preparation of Polyaniline – Carboxymethyl Cellulose – TiO2 hybrid nanocomposite and Investigation of its physicochemical and Antibacterial Properties [Volume 5, Issue 2, 2016, Pages 31-39]
Nano-Compposite
Effect of Synthesis Temperature on the Morphology and Particles Size of Sno/Zno Nanocomposites Synthesized Via Chemical Bath Deposition, CBD (RESEARCH NOTE) [-2, 4*, 2009, Pages 419-426]
Nanocrystalline Cu-20Zn-10Al
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Nano-Crystalline Particles
Effect of Synthesis Conditions in the Co-Precipitation Method on the Formation Mechanism of Barium Hexaferrite Nano-Crystalline Particles [-1, 4*, 2010, Pages 293-300]
Nano crystallite
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Nano-diamond
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Nano Droplet
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Nanoemulsion
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
Nanofiber
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Nanofiber
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Nano-fibers
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Nanofibers
Synthesis and Characterization of Chitosan/Poly (Vinyl Alcohol) Polymer Nanofibers Containing Chicory Extract by Electrospun Method and Evaluation of Its Antibacterial Properties [Volume 11, Issue 4, 2022, Pages 31-44]
Nanofiber Scaffold
Fabrication and Characterization of Collagen Nanofiber/Fibroin Silk Scaffolds for Corneal Tissue Engineering [Volume 11, Issue 3, 2022, Pages 15-30]
Nanofluid
Hydroxyapatite Bioceramic Heat Transfer Comparison in Water and Simulated Body Fluid after Addition of Carbon Nanotube [Volume 11, Issue 1, 2022, Pages 95-105]
Nano hydroxyapatite
Using of Granulated Nano-Hydroxyapatite to Absorb Cadmium from Aqueous Ssolutions in a fixed Bed Reactor [Volume 5, Issue 2, 2016, Pages 49-57]
Nanoindentation
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
Nano-mechanical properties
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Nanoparticles
The Effect of Synthesis Temperature on TiO2 Nanoparticles Prepared by Sonochemical Method [-1, 2*, 2010, Pages 167-173]
Nanoparticles
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Nanoparticles
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Nanoparticles
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Nanoparticles
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Nanoparticles
An Overview of Different Types of Self-Healing Concrete Construction Methods [Volume 11, Issue 1, 2022, Pages 35-53]
Nanoparticles Ru-Ce mixed oxide
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Nanoparticle synthesis
Synthesis of Manganese Oxide Nanoparticles Using Thermal Decomposition Method [Volume 9, Issue 1, 2020, Pages 57-65]
Nano photocatalysts
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Nanopigments
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Nano powder
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Nanopowder
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Nanopowder
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
Nano powders
Synthesis of Lead TitanateZirconate Nano Powders via Sol-Gel Process and Investigation of DielectricProperties of the Sintered Pellets [Volume 2, Issue 1, 2013, Pages 49-54]
Nanorods
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Nanosheet
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Nano Silica Particles
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Nanosodalite
Effect of Crystallization Time for Synthesis of Nanosized Sodalite Zeolite from Rice Husk Ash [-1, 2*, 2010, Pages 161-166]
Nano-structure
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Nanostructure
Preparation and Evaluation of Nanostructured Neodymium Titanate via Chemical Method [-1, 2*, 2010, Pages 107-115]
Nanostructure
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Nanostructure
Kinetic Study on the Effect of PH in the Photocatalytic Degradation of Methylene Blue With Fe-FeS Nanocomposite Powder [Volume 6, Issue 3, 2017, Pages 1-8]
Nanostructure
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Nanostructure
Characterization of Nanostructure Coatings of Ti-Al-C-N System Deposited Using Plasma Assisted Chemical Vapor Deposition [Volume 9, Issue 1, 2020, Pages 19-31]
Nanostructure
Fabrication of Nanostructured Apatite Scaffolds by Freeze-Casting Method for Bone Tissue Engineering [Volume 10, Issue 2, 2021, Pages 21-31]
Nanostructure Bainite
Development of Nanostructured Bainitic Steel by Utilizing the Two Steps Austempering Heat Ttreatment [Volume 5, Issue 4, 2016, Pages 11-17]
Nano-structured bainitic steel
The Effect of Austenite Grain Size on the Microstructure of the Medium Carbon Nanobainitic Steel [Volume 7, Issue 4, 2018, Pages 25-36]
Nanostructured Composite
Reinforcement and Annealing Effect on Microstructural Properties of Al-10Mg/Al21O3 Nanocomposites Prepared with Mechanical Alloying
Techniques [Volume 5, Issue 2, 2016, Pages 17-23]
Nanostructured powder
Microstructural Evolution of Nanostructured Al-Mg Powder System During Ball Milling and Post Heat Treatment Processes [Volume 6, Issue 2, 2017, Pages 35-43]
Nanostructures
Electrochemical Synthesis of Yttrium Aluminum Garnet Nanostructures in the Presence of Cationic Surfactant: CTAB [Volume 10, Issue 2, 2021, Pages 13-19]
Nano-titania
Effect of adding nano-titania on mechanical properties and hydroxyapatit formation of calcium phosphate cement in human blood plasma [Volume 2, Issue 1, 2013, Pages 21-28]
Nano Zeolite
The Effect of Pore Structure on the Adsorption and Storage of Hydrogen in Nanozeolite [-2, 4*, 2009, Pages 347-354]
Natural convection
Effect of Applying a Constant Magnetic Field on Transient Natural Convection in a Square Cavity and Investigation of Heat Lines [-1, 3*, 2010, Pages 233-248]
Natural convection
Numerical Study of Effect of Applying a Magnetic Field on Natural Convection in a Tilted Square Cavity with Constant Temperature Sidewalls [-1, 3*, 2010, Pages 249-265]
Natural Cooling
Numerical Simulation of Natural Ventilation and Cooling a Building by Combined Wind tower and Solar Chimney [-1, 4*, 2010, Pages 301-308]
Nax Zeolite
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
Nb2AlC ternary compound
Synthesis of nanocomposite based on Nb2AlC ternary compound with Al2O3 reinforcing via SHS and MASHS [Volume 2, Issue 2, 2013, Pages 33-37]
NCM
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
NdFeCoB Nanoparticles
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
Nd:YAG pulsed laser
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Neat PDLLA
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
Neodyminum Titanate
Preparation and Evaluation of Nanostructured Neodymium Titanate via Chemical Method [-1, 2*, 2010, Pages 107-115]
New Cobalt-Nickel Base
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Ni4Ti3 Precipitation
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Ni base coat
Effects of CeO2 addition on corrosion resistance and microstructure of the Ni-base coatings [Volume 3, Issue 4, 2014, Pages 43-52]
Nibral Alloy
Evaluation of Microstructure and Wear Behavior of Iron-Titanium Composition Coating Applied by HVOF Process [Volume 9, Issue 4, 2020, Pages 13-21]
Ni-Br-Al Alloy
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Nickel-aluminum bronze
Investigating theEffect of Heat Treatment on Microstructure, Hardness andCorrosion Behavior of Nickel-Aluminum Bronze [Volume 2, Issue 1, 2013, Pages 71-80]
Nickel Base Superalloy
Investigation of Morphology and Particle Size of γ' in Nickel Base Superalloy X-750 under Different Aging Temperatures [Volume 9, Issue 2, 2020, Pages 43-51]
Nickel hexacyanoferrate
Chemical Deposition of Nickel Hexacyanoferrate Nanoparticles on a Stainless-Steel Mesh Substrate for Supercapacitor Application [Volume 11, Issue 2, 2022, Pages 45-56]
Nickel hydroxide
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Nickel-Metal Hydride Battery
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Nickel molybdate
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Nickel nanocrystalline layers
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Nickel nanowires
Flexible Multicomponent Nanocomposite Cover for Efficient Absorption of Electromagnetic Waves [Volume 11, Issue 2, 2022, Pages 27-43]
Nickel substrate
Synthesis of graphene from organic materials via layer deposition on metal surface [Volume 2, Issue 2, 2013, Pages 39-43]
NiCrAlY
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Ni/Cu contact
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Ni/Cu structure
Fabrication Ohmic Contact of Ni/Cu Structure on Polycrystalline Silicon Via Electrochemical Method used in Solar Cells [-3, 2*, 2008, Pages 183-190]
Ni leaching
Optimization Study of Nickel Leaching from Used Catalysts and Investigation of Nickel Separation by Precipitation [Volume 9, Issue 4, 2020, Pages 71-77]
Nimonic 75
Phase and Microstructural Evolutions and Fracture Behavior of Nimonic 75 Transient Liquid Phase Joints at Different Temperatures [Volume 9, Issue 3, 2020, Pages 37-49]
Niobium
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
Niobium Inclusions
Removing of the Niobium Rich Inclusions from Microstructure of a New Titanium Aluminide Intermetallic Alloy [-1, 2*, 2010, Pages 97-106]
Niosome
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
NiTi
Influence of Ti Content on Shape Memory Effect of Trained Niti Alloy under Thermomechanical Cycles [-2, 4*, 2009, Pages 335-340]
NiTi alloy
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
NiTiNb
Formation of amorphous and nano-crystalline phases via mechanical alloying of elemental powder with stoichiometric composition of Ni0.5Ti0.4Nb0.1 and their thermodynamic evaluation using Medima model [Volume 3, Issue 1, 2014, Pages 9-19]
NiTiO3
Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2-36NiO-26C) Nano-Composite Prepared by Mechanical Milling [Volume 6, Issue 1, 2017, Pages 1-9]
Niti Shape Memory Alloys
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Niti Single Crystal
DSC Studies of Multi Step Martensitic Transformations in a Single Crystal of Ni51Ti49 Alloy [-2, 3*, 2009, Pages 281-289]
Nitrate
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Nitrate removal
Surface Modification of Carbonaceous Adsorbents for Removal of Nitrate from Water [Volume 6, Issue 2, 2017, Pages 65-77]
Nitrate removal
Fabrication of Adsorbent from Coconut Coir by EDM Method for Removal of Nitrate from Aqueous Solutions [Volume 7, Issue 1, 2018, Pages 45-52]
Nitridation
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
NMC
Optimization of Li-Excess Content on the Performance of Lix(Ni0.3Mn0.5Co0.2)O2 Cathode Materials in Li-ion Battery [Volume 9, Issue 1, 2020, Pages 1-10]
NO2 gas
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Non-Dendritic
Verifying the Effects of SIMA (Strain Induced Melt Activation) Process on Corrosion Behavior in Al Sacrificial Anodes [Volume 5, Issue 3, 2016, Pages 51-64]
Non- Ionic Surfactants
Synthesis of Zinc Oxide Nanoparticles from 2-Methoxy Ethanol via Chemical Bath Deposition [-2, 4*, 2009, Pages 411-417]
Non-metallic inclusions
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2013, Pages 11-23]
Noparticles
Chemical Synthesis and Characterization of Physical and Magnetic Properties of Cobalt Doped Hydroxyapatite Nanoparticles [Volume 5, Issue 2, 2016, Pages 1-8]
Nuclear magnetic resonance
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Nucleation Agent؛ Mechanical Properties
Effects Kind of Nucleation Agent Particle Size on the Crystalline Phases and Microstructure of Glass-Ceramics for Dentistry Applications [-2, 4*, 2009, Pages 379-390]
Nusselt Number
Effect of Applying a Constant Magnetic Field on Transient Natural Convection in a Square Cavity and Investigation of Heat Lines [-1, 3*, 2010, Pages 233-248]
Nusselt Number
Numerical Study of Effect of Applying a Magnetic Field on Natural Convection in a Tilted Square Cavity with Constant Temperature Sidewalls [-1, 3*, 2010, Pages 249-265]
Nutrient Agar
Investigation of Antibacterial Properties of Titanium Dioxide Nano Colloids on the Surface of Historical Cotton Fabrics [Volume 10, Issue 3, 2021, Pages 15-24]
O
Octanol
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Ohmic Contact
Fabrication Ohmic Contact of Ni/Cu Structure on Polycrystalline Silicon Via Electrochemical Method used in Solar Cells [-3, 2*, 2008, Pages 183-190]
OLED
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Oleic acid
Fabrication of a Converter for Converting of Vibrational Energy to Electrical Energy Using Fe3O4 Ferrofluid [Volume 10, Issue 1, 2021, Pages 65-74]
Optical microscopy
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Optical properties
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
Optical properties
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Optical properties
Investigation of Electrical and Optical Properties of CZTS with Doping of the Fifth Group Elements of the Periodic Table: A Density Functional Theory Study [Volume 10, Issue 3, 2021, Pages 67-78]
Optical properties
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Optical properties
Study on the Optical Properties of WS2 Thin Films Annealed in Various Atmospheres Including Ar, Ar/H2, NH3/H2O, and O2 [Volume 11, Issue 4, 2022, Pages 45-54]
Optimizing the Absorber Layer Deposition
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
Ordered mesoporous films
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
Organic Solar Cell
Effect of the PEDOT:PSS Thin Layer Coated on ITO Substrate on Two Layers Organic Solar Cells Properties Consist of Fullerene Copper Phtalocyanine [-1, 2*, 2010, Pages 117-122]
Orientation
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]
Orthodontic Wire
Effect of Constrained Ageing on Orthodontic Wires for Changing Their Control to Reinforcements in Smart Metal/Polymer Composite [-2, 1*, 2009, Pages 28-39]
Oseen'Tensor
Hydrodynamic Interactions between Two Micro-Swimmers [-1, 2*, 2010, Pages 139-143]
Osteoconduction
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Oven Chemical
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
Overpotential
Deposition of Molybdenum disulfide nanosheets on carbon cloth by electrophoretic method and their performance in hydrogen evolution reaction [Volume 9, Issue 1, 2020, Pages 11-17]
Oxidation Resistance
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Oxidation Resistance
Electrophoretic deposition of CoFe2O4 coating for solid oxide fuel cellinterconnects [Volume 2, Issue 1, 2013, Pages 11-19]
Oxidized Alginate
Effect of Oxidation Degree (OD) of Oxidized-Alginate on the Properties of Self-Vrosslinkable Oxidized Alginate-Gelatin Bioinks in 3D Bioprinting Process [Volume 13, Issue 1, 2024, Pages 31-45]
Oxygen Vacancies
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
P
P3HB
Evaluation of bioactivity poly-3-hydroxybutyrate coated Nano-Bioglass 45S5 composite scaffolds for bone tissue engineering [Volume 2, Issue 4, 2013, Pages 10-18]
PACVD
Characterization of Nanostructure Coatings of Ti-Al-C-N System Deposited Using Plasma Assisted Chemical Vapor Deposition [Volume 9, Issue 1, 2020, Pages 19-31]
Paraloid
Study of the effect of silica nanoparticles on the conservative properties of acrylic coatings [Volume 2, Issue 3, 2013, Pages 69-78]
Paramagnetic
Chemical Synthesis and Characterization of Physical and Magnetic Properties of Cobalt Doped Hydroxyapatite Nanoparticles [Volume 5, Issue 2, 2016, Pages 1-8]
Paranitrophenol
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Partial Wetting
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
PbTiO3
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
PDLLA/PCL/BGn nanocomposites
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
PDLLA/PCL blend
Dynamic Mechanical Properties of PDLLA/PCL Blends and their Nanocomposites with Bioactive Glass as Nanofiller [Volume 6, Issue 1, 2017, Pages 11-21]
PDMS composite
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Peeling test
Effect of Brushing Direction and Annealing on the Microstructure and Bonding Strength of AA6061 Aluminum Alloy Processed by Accumulative Roll-Bonding [Volume 12, Issue 1, 2023, Pages 43-56]
Perchloric Acid
Evaluation of temperature and electrolyte concentration in electropolishing process on corrosion resistance of Inconel 718 alloy [Volume 7, Issue 2, 2018, Pages 31-39]
Perlite
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Permanent Linear Change
Effect of Composition and Sintering Temperature on PermanentLinear Change of Alumina-Magnesia-Graphite Refractories Using Box-Behnken Experimental Design [-2, 4*, 2009, Pages 355-368]
Perovskite
Study of Nano Particles Effects of Fe and Mn Compound in (La,Ce)(Pd,Co)O3 Perovskite Catalysts and its Comparison with Imported Catalyst of Iran Khodro with Nobel Metals [-3, 2*, 2008, Pages 153-162]
Perovskite
Synthesis of Lead TitanateZirconate Nano Powders via Sol-Gel Process and Investigation of DielectricProperties of the Sintered Pellets [Volume 2, Issue 1, 2013, Pages 49-54]
Perovskite
The effect of sintering temperature on microstructure and microwave dielectric properties of 0.88Ba([Zn0.6Co0.4]1/3,Nb2/3)O3–0.1Ba(Ga1/2Ta1/2)O3–0.02BaZrO3 ceramics [Volume 2, Issue 4, 2013, Pages 35-42]
Perovskite
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
Persian cumin
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
PFZ thickness
Investigation of Morphology and Particle Size of γ' in Nickel Base Superalloy X-750 under Different Aging Temperatures [Volume 9, Issue 2, 2020, Pages 43-51]
Phase analysis
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Phase evolutions
Phase and Microstructural Evolutions and Fracture Behavior of Nimonic 75 Transient Liquid Phase Joints at Different Temperatures [Volume 9, Issue 3, 2020, Pages 37-49]
Phlogopite
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
Phosphate-Based Electrolyte
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Phosphorous
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Photoanode
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
Photocatalytic
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Photoelectric Parameters
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
Photo-immobilization
Photoimmobilization of Synthesized Photoreative Gelatin by Laser Irradiation for Applications of Photobiolithography and Cell Printing [Volume 2, Issue 2, 2013, Pages 87-97]
Photolithography
Photoimmobilization of Synthesized Photoreative Gelatin by Laser Irradiation for Applications of Photobiolithography and Cell Printing [Volume 2, Issue 2, 2013, Pages 87-97]
Photoluminescence
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Photoreactive Gelatin
Photoimmobilization of Synthesized Photoreative Gelatin by Laser Irradiation for Applications of Photobiolithography and Cell Printing [Volume 2, Issue 2, 2013, Pages 87-97]
Photovoltaic materials
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Physiologic Solution
Anodizing Of Titanium in Acidic Electrolytes and Evaluation of Its Corrosion Resistance in PBS Physiologic Solution [-2, 1*, 2009, Pages 11-20]
Phytoremediation
Role of Plants Rumex Pulcher and Verbascum Songaricum in Accumulation of some Heavy Metals in Sarcheshmeh Copper Mine, Iran [-3, 2*, 2008, Pages 129-136]
Piezoceramics
Synthesis and Sintering of Potassium Sodium Niobate Lead-Free Piezoelectric Ceramics [-1, 2*, 2010, Pages 175-184]
Piezoelectric
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Piezoelectric Triboelectric
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
Pinning Force
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Pipe Lines
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
Pitting Corrosion
Pitting corrosion of nanostructure AA5052 aluminum alloy fabricated by Accumulative Roll-Bonding in chloride media [-2, 1*, 2009, Pages 72-82]
Pixonal Image
Efficient Approach for Image Segmentation Using the Concept of Pixon and Markov Random Field [-2, 3*, 2009, Pages 241-253]
Planar perovskite solar cell
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Plant species
Role of Plants Rumex Pulcher and Verbascum Songaricum in Accumulation of some Heavy Metals in Sarcheshmeh Copper Mine, Iran [-3, 2*, 2008, Pages 129-136]
Plasma-Activated Sintering
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
Plasma electrolytic oxidation
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Plasma electrolytic oxidation
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Plasma enhanced chemical vapor deposition
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Plasma immersion ion implantation
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Plasma nitrocarburizing
G 292 Osteoblastic Cell Behavior on DLC Coated 316L Stainless Steel for Medical Implants [Volume 6, Issue 2, 2017, Pages 45-53]
Plasma spray
Improving Mechanical Properties of Nanostructured Cr2O3 Plasma Sprayed Coating through formation of Cr2O3-20YSZ-10SiC Nanocomposite Coatings [Volume 7, Issue 4, 2018, Pages 11-23]
Plasma spraying
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Plateau Stress
Effect of Aging Treatment on Tensile and Superelastic Behavior in Ni-Rich NiTi Alloy (50.9 Atom%Ni) [-2, 3*, 2009, Pages 231-240]
Polarization Resistance
Evaluation the Role of Carbon in the Polarization Resistance of Silver Electrodes Used in the Silver Oxide-Zinc Cells [Volume 5, Issue 3, 2016, Pages 33-40]
Polarization Test
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Pollutant
Removal of Paranitrophenol from Water by Cyclodextrin Based Polymers [Volume 12, Issue 3, 2023, Pages 1-13]
Polyaniline
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Polyaniline
Preparation of Polyaniline – Carboxymethyl Cellulose – TiO2 hybrid nanocomposite and Investigation of its physicochemical and Antibacterial Properties [Volume 5, Issue 2, 2016, Pages 31-39]
Polyaniline
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
Polyaniline
Flexible Multicomponent Nanocomposite Cover for Efficient Absorption of Electromagnetic Waves [Volume 11, Issue 2, 2022, Pages 27-43]
Polycrystalline Silicon
Fabrication Ohmic Contact of Ni/Cu Structure on Polycrystalline Silicon Via Electrochemical Method used in Solar Cells [-3, 2*, 2008, Pages 183-190]
Polyelectrolyte
Preparation and Characterization of Microspheres Based on Gelatin-Sodium Alginate-Genipin by the Formation of Polyelectrolyte Complex [Volume 9, Issue 3, 2020, Pages 63-78]
Polylactic Acid
E-Design and Fabrication of 3D-Printed Polycaprolactone/Poly Lactic-co-Glycolic Acid Hybrid Scaffold Containing Alginate Nanoparticles for Cartilage Tissue Engineering Applications [Volume 11, Issue 3, 2022, Pages 57-74]
Polymer Film
Determination of Vanadium by Optical Sensing Film [Volume 5, Issue 3, 2016, Pages 25-32]
Polyols
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Polypyrrole
The Effect of 304 Stainless Steel Substrate Surface Preparation Method on Coating Process of Polypyrrole/Polyaniline Conductive Polymers and Corrosion Resistance Improvement [Volume 10, Issue 2, 2021, Pages 33-44]
Porous
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Porous materials
Hydrothermal Synthesis and Investigation of Parameters Influencing Moisture Adsorption of Zeolite 13X Powder [Volume 12, Issue 4, 2023, Pages 61-72]
Porous NiTi
Effect of Pore Content on Mechanical Properties of Porous Nitinol under Compressive Loading [Volume 2, Issue 2, 2013, Pages 45-52]
Porous Parts
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Potassium phosphate
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Potassium sodium niobate
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Potassium-sodium niobate
Synthesis and Sintering of Potassium Sodium Niobate Lead-Free Piezoelectric Ceramics [-1, 2*, 2010, Pages 175-184]
Powder Injection Molding
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Powder Metallurgy
Study and Investigation on behavior of Al6061 powders after Mechanical Alloying [Volume 2, Issue 2, 2013, Pages 77-86]
Powder Metallurgy
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Powder Metallurgy
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Powder Metallurgy
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
Powder Metallurgy
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Powder Metallurgy
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Powder Synthesis
Synthesis and Sintering of Potassium Sodium Niobate Lead-Free Piezoelectric Ceramics [-1, 2*, 2010, Pages 175-184]
Powder Wastes
Recycling of Deformed Powder from Submerge Arc Welding (SAW) [-3, 2*, 2008, Pages 115-127]
Power Variation
Effect of Aging on the Electrical Conductivity of Tin Oxide Thick Film in Presence of Ethanol [-4, 1*, 2007, Pages 95-105]
Pozzolan
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Practical Properties
Improvement of Practical Properties of Wood Polymer Composite with Nanoclay Particles [-2, 4*, 2009, Pages 369-377]
Praseodymium
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Prealloyed Powder
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Pre-analysis
A Novel Idea on Automatic Network Design for Terrestrial Laser Scanner [-4, 1*, 2007, Pages 13-24]
Precipitate
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Precipitation
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Prehydrolysis
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Pressureless sintering
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
Protection
Examination of the effect of colloidalsilvernanoparticles on the fibers of handmade carpets dyed by madder dye against biological and natural factor [Volume 2, Issue 2, 2013, Pages 53-57]
Protonation
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Pulse current
Design Experiment Methods for Optimization of Aluminum Anodize Coating Hardness [Volume 7, Issue 1, 2018, Pages 1-9]
Pulsed Laser Parameters
Effects of Nd: YAG Pulsed Laser Beam Parameters on Microstructure and Dimensions of Weld Pool for a Copper-Beryllium Plate [-3, 2*, 2008, Pages 207-216]
Purification
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Pyrolysis
Synthesis of Porous Nickel Foam Based on Electroless Plating on Polymeric Substrate and Electrodeposition [Volume 11, Issue 1, 2022, Pages 69-79]
PZT
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
PZT
Synthesis of PZT by Two-Step Solid State Reaction and Evaluation of the Effect of Nb2O5 Doping on Its Electrical Properties [Volume 11, Issue 4, 2022, Pages 55-64]
PZT
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
PZTN
Synthesis of PZT by Two-Step Solid State Reaction and Evaluation of the Effect of Nb2O5 Doping on Its Electrical Properties [Volume 11, Issue 4, 2022, Pages 55-64]
Q
Q&P
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Quality factor
The effect of sintering temperature on microstructure and microwave dielectric properties of 0.88Ba([Zn0.6Co0.4]1/3,Nb2/3)O3–0.1Ba(Ga1/2Ta1/2)O3–0.02BaZrO3 ceramics [Volume 2, Issue 4, 2013, Pages 35-42]
Quality factor
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
R
RADAR
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
Radar waves absorption
Investigation the Radar Absorption Behavior of Polymer Matrix Composites with Doped Barium Hexaferrite Particles [Volume 5, Issue 3, 2016, Pages 17-23]
Radial distribution function
Simulation of the structure 58SiO2–38CaO–4P2O5 bioactive glass nanoparticles at atomic scale by molecular dynamics [Volume 7, Issue 2, 2018, Pages 41-48]
Reaction Bonding
Mullite Formation by Direct Oxidation Method in Al2O3+Si Al+SiO2 and Al+Si Systems [-4, 1*, 2007, Pages 31-44]
Recrystallization
The Effect of SiC Nanoparticles and Liquid Nitrogen Medium on Microstructure Evolutions of Severely Deformed Al During Friction Stir Processing [Volume 5, Issue 4, 2016, Pages 1-9]
Recycling
Recycling of Deformed Powder from Submerge Arc Welding (SAW) [-3, 2*, 2008, Pages 115-127]
Reduction Diffusion
Microstructural and Magnetic Properties of Nd2(Fe1-xCox)14B Magnetic Nanoparticles Prepared by the Diffusion Reduction Process [Volume 12, Issue 1, 2023, Pages 29-42]
REELS
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Refinery Effluent
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Refractory Castable
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Refractory Castable
The Effect of Surfactant Agents on the Oxidation and Slag Corrosion Resistances of the Self-Flowing Refractory Castables in BF Troughs [-1, 2*, 2010, Pages 151-159]
Refractory Cement
An Investigation on the Fabrication and Properties of Ultra Low Cement Cordierite Mullite Refractory Castables [-1, 4*, 2010, Pages 309-317]
Reliability
MODM Model for Determining PM Requirements by Conflict of Maintenance System Reliability and Lean Thinking [-4, 1*, 2007, Pages 77-94]
Remained Strain
Effect of Aging Treatment on Tensile and Superelastic Behavior in Ni-Rich NiTi Alloy (50.9 Atom%Ni) [-2, 3*, 2009, Pages 231-240]
Remineralization
Synthesis and Characterization of Magnesium Hydroxyapatite Nanopowders for Enamel Remineralization of Initial Caries Lesions [Volume 6, Issue 4, 2017, Pages 1-10]
Removal
Remove Pb2+ and Ni2+ heavy metals by hydroxyapatite structure Prepared with acids and bases methods of aqueous solutions [Volume 3, Issue 2, 2014, Pages 71-79]
Removal Efficiency
The Study of kinetic Reaction of the Photocatalytic Elimination of Methyl Orange in the presence of Magnetic Composite of Fe3O4-ZnO Based on Graphene Oxide [Volume 9, Issue 1, 2020, Pages 49-56]
Response surface methodology (RSM)
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Reverse Micelle
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Reynold's Number
Hydrodynamic Interactions between Two Micro-Swimmers [-1, 2*, 2010, Pages 139-143]
RF Sputtering
Deposition and Determination of the Properties of Silicon Nitride Films in Argon and Nitrogen Atmospheres [-3, 2*, 2008, Pages 175-182]
RF Sputtering
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Rhemboherdal Phase
Effect of Yttrium Additive Oxide on Phase Stability of Bismuth Oxide [-4, 1*, 2007, Pages 69-76]
Rheological properties
Studying of the Effect of Surfactant and Reinforcement on Rheological Properties of Mg Matrix Composite Feedstock [Volume 2, Issue 2, 2013, Pages 11-21]
Rheology
Fabrication of Alumina Parts Using Injection Molding [-1, 4*, 2010, Pages 349-356]
Rheology
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Rheology
Effect of carbon black masterbatch and polymer process aids based on fluoroelastomer and hyper branch polymers on melt fracture of bimodal polyethylene [Volume 7, Issue 3, 2018, Pages 67-79]
Rheology
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Rice husk
Determination of Optimal Method for Extraction of Amorphous Silica from Rice Husk as an Agricultural Waste [-1, 4*, 2010, Pages 357-363]
Rice Husk Ash
Effect of Crystallization Time for Synthesis of Nanosized Sodalite Zeolite from Rice Husk Ash [-1, 2*, 2010, Pages 161-166]
Rolling
Study on the Formation of Globular Microstructure in 7075-Al alloy during Strain Induced Melt Activated (SIMA) process [Volume 5, Issue 4, 2016, Pages 19-28]
Rotating drum
Effects of Rotating Drum and Polymer Concentration on Morphology of Electrospun TiO2/PVP Nanofibers [Volume 9, Issue 4, 2020, Pages 59-69]
S
Sacrificial Anode
Verifying the Effects of SIMA (Strain Induced Melt Activation) Process on Corrosion Behavior in Al Sacrificial Anodes [Volume 5, Issue 3, 2016, Pages 51-64]
Salisbury screen
Investigation of Using Nickel Based Conductive Coatings in the Radar Wave Absorbers With Salisbury Screen Structure [Volume 6, Issue 3, 2017, Pages 51-59]
Sarcheshmeh copper mine
Role of Plants Rumex Pulcher and Verbascum Songaricum in Accumulation of some Heavy Metals in Sarcheshmeh Copper Mine, Iran [-3, 2*, 2008, Pages 129-136]
Saturation magnetization
The Effect of Honey Addition on the Properties of CoFe2O4 Nanoparticles Synthesized by the Sol-Gel Auto-Combustion Method [Volume 11, Issue 4, 2022, Pages 1-18]
SBA-15
Tuning the Morphology of SBA-15 Silica Materials from Rodlike to Platelet in the Presence of Zirconium [Volume 4, Issue 3, 2015, Pages 25-32]
Scaffold
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Scaffold
Fabrication and Evaluation of Physical and Biological Properties of Hydroxyethyl Cellulose/Hyaluronic Acid-Based Scaffolds Used for Second-Degree (Partial-Thickness) Burns Wounds Healing [Volume 9, Issue 4, 2020, Pages 35-46]
Scanning electron microscopy (SEM)
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
Scanning electron microscopy (SEM)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
Schiff base
Electrochemical Study on the Effect of Schiff Base-Chromium Complex on Steel Corrosion in HCl Solution [Volume 3, Issue 4, 2014, Pages 77-83]
Sedge
Synthesise of nanoporous materials of MCM-41 by the extracted silica from sedge [Volume 2, Issue 4, 2013, Pages 1-9]
Segregation Elements
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Self assembled thin film
The Performance Corrosion Protection of Self-Assembled Copper Phthalocyanine/Nanostructure Hybrid Coating on Carbon Steel in Acidic Solution [Volume 4, Issue 4, 2015, Pages 43-53]
Self-flowing
The Effect of Surfactant Agents on the Oxidation and Slag Corrosion Resistances of the Self-Flowing Refractory Castables in BF Troughs [-1, 2*, 2010, Pages 151-159]
Self-healing
The corrosion resistance of the composite coatings Polyaniline/Urea-formaldehyde microcapsules containing healing agent [Volume 3, Issue 4, 2014, Pages 21-33]
Self-healing
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
Self-healing Concrete
An Overview of Different Types of Self-Healing Concrete Construction Methods [Volume 11, Issue 1, 2022, Pages 35-53]
Self-healing mechanism
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Self-Propagation High-Temperature Synthesis (SHS)
Fabrication of Al2O3-B4C Nanocomposite via Ball Milling, Subsequent Self-Propagation High-Temperature Synthesis, and Final Hot Pressing [Volume 9, Issue 4, 2020, Pages 1-11]
SEM
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
SEM-EDX
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Semiconductor
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Semi-Solid
Study on the Formation of Globular Microstructure in 7075-Al alloy during Strain Induced Melt Activated (SIMA) process [Volume 5, Issue 4, 2016, Pages 19-28]
Semi-Solid Cooling Slope Casting
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Semi-solid forming
Investigation on effect of die temperature and reheating treatment on microstructure of A360 aluminium alloy semi-solid forming [-1, 4*, 2010, Pages 341-347]
Set Up
Effect of Precursor Concentration on the Microstructure of Aluminum Oxide Coating Made through the Solution Precursor Plasma Spray Process [Volume 11, Issue 1, 2022, Pages 1-12]
Severe plastic deformation
Investigation of severe plastic deformation effect on microstructure of Ti-6Al-4V alloy [Volume 5, Issue 1, 2016, Pages 59-64]
Severe plastic deformation
The Effect of SiC Nanoparticles and Liquid Nitrogen Medium on Microstructure Evolutions of Severely Deformed Al During Friction Stir Processing [Volume 5, Issue 4, 2016, Pages 1-9]
Shah-shahān house
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
Shape memory alloy
Influence of Ti Content on Shape Memory Effect of Trained Niti Alloy under Thermomechanical Cycles [-2, 4*, 2009, Pages 335-340]
Shape Memory Effect
Influence of Ti Content on Shape Memory Effect of Trained Niti Alloy under Thermomechanical Cycles [-2, 4*, 2009, Pages 335-340]
Shear strength
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
SHS
Synthesis of Dense Structural Materials based on Mo(Si, Al) 2 by One Step SHS and Without External Pressure [-4, 1*, 2007, Pages 45-50]
SHS
Effect of Si by Al on Phase-Transformation and Microstructure of
MoSi2 based Compounds Synthesized by SHS Method [-4, 1*, 2007, Pages 51-58]
SHS
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
SHS
Synthesis of nanocomposite based on Nb2AlC ternary compound with Al2O3 reinforcing via SHS and MASHS [Volume 2, Issue 2, 2013, Pages 33-37]
SHS
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Si3N4
Investigation of Addition of CNT and Sintering Process on Microstructure and Mechanical Properties of Al-Si3N4-CNT Nano Composite [Volume 9, Issue 1, 2020, Pages 39-48]
Si3n4 Keyword 2
Investigation on densification, compaction and mechanical properties of Si3N4 composite [Volume 11, Issue 4, 2022, Pages 65-85]
SIC
The Synthesis of MoSi2-SiC Nano Structural Composites by SHS [-2, 3*, 2009, Pages 273-280]
SIC
The effect of volume percent of SiC reinforcement phase on the morphology and microstructure of nano aluminum composite powders made by mechanical alloying [Volume 2, Issue 1, 2013, Pages 39-47]
Sic/BN Nano
Study of Machinable Silicon Carbide-Boron Nitride Ceramic Nanocomposites [-2, 3*, 2009, Pages 317-322]
SiC nanoparticles
The Effect of SiC Nanoparticles and Liquid Nitrogen Medium on Microstructure Evolutions of Severely Deformed Al During Friction Stir Processing [Volume 5, Issue 4, 2016, Pages 1-9]
Signal Processor
Improving the Performance of Signal Processor Unit in Cochlear Implants and Providing a Method for its Evaluation [-2, 4*, 2009, Pages 323-334]
Sil erosion
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Silica
Determination of Optimal Method for Extraction of Amorphous Silica from Rice Husk as an Agricultural Waste [-1, 4*, 2010, Pages 357-363]
Silica Nanoparticles
Study of the effect of silica nanoparticles on the conservative properties of acrylic coatings [Volume 2, Issue 3, 2013, Pages 69-78]
Silica Nanoparticles SBA_15
Synthesis and Characterization of Polylactic/Glycolic Acid Copolymer to Prepare Biodegradable Skin Staple [Volume 13, Issue 1, 2024, Pages 69-81]
Silicium Oxide
Mullite Formation by Direct Oxidation Method in Al2O3+Si Al+SiO2 and Al+Si Systems [-4, 1*, 2007, Pages 31-44]
Silicon
Mullite Formation by Direct Oxidation Method in Al2O3+Si Al+SiO2 and Al+Si Systems [-4, 1*, 2007, Pages 31-44]
Silicon carbide
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2013, Pages 42-49]
Silicon carbide
Investigation of microstructure, mechanical and wear properties of nanocomposite Al-5%Cu/SiC produced by powder metallurgy method [Volume 2, Issue 4, 2013, Pages 27-34]
Silicon carbide
The Investigating to Physical and Mechanical properties of Nano Polyester matrix composites reinforced with Fiber Glass and silicon carbide [Volume 3, Issue 1, 2014, Pages 61-69]
Silicon carbide
Identification of undesirable phases and purification boron carbide - silicon carbide nanocomposite prepared by mechanically activated SHS [Volume 3, Issue 2, 2014, Pages 19-25]
Silicon carbide
The effect of substrate preparation and the peak current density in pulse platingof Cu-SiCnanocompositecoatingsonmorphology, grain size, porosity, hardness and corrosion properties [Volume 3, Issue 2, 2014, Pages 27-35]
Silicon carbide
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Silicon Nitride
Effect of Aging on the Electrical Conductivity of Tin Oxide Thick Film in Presence of Ethanol [-4, 1*, 2007, Pages 95-105]
Silicon Nitride
Deposition and Determination of the Properties of Silicon Nitride Films in Argon and Nitrogen Atmospheres [-3, 2*, 2008, Pages 175-182]
Silicon Nitride
The Effect of Gas Pressure on the Nitridation of Silicon Bodies [Volume 12, Issue 3, 2023, Pages 31-42]
Silicon Resin
Fabrication of Cordierite Glass Ceramic with the Use of Silicone Resin and Investigating Its Mechanical Properties [Volume 9, Issue 2, 2020, Pages 63-71]
Silicon solar cells
Simulation and Optimization of Bifacial Solar Cells with a Hetero-Junction MicroCrystalline Intrinsic thin layer [Volume 5, Issue 2, 2016, Pages 41-48]
Silk fibroin
Fabrication and Characterization of Properties of Silk Fibroin Scaffold Containing Ascorbic Acid-Loaded Chitosan Nanoparticles for Bone Regeneration Applications [Volume 10, Issue 4, 2021, Pages 25-36]
Silk Fibroin Nanofiber
Investigation of Fabrication and Synthesis of CappaCarrageenan/Silk Fibroin Nanofibers Scaffolds for Bone Tissue Engineering [Volume 7, Issue 3, 2018, Pages 1-10]
Silver Electrode
Evaluation the Role of Carbon in the Polarization Resistance of Silver Electrodes Used in the Silver Oxide-Zinc Cells [Volume 5, Issue 3, 2016, Pages 33-40]
Silver nanoparticles
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
Silver Oxide -Zinc Batteries
Evaluation the Role of Carbon in the Polarization Resistance of Silver Electrodes Used in the Silver Oxide-Zinc Cells [Volume 5, Issue 3, 2016, Pages 33-40]
Sima
Verifying the Effects of SIMA (Strain Induced Melt Activation) Process on Corrosion Behavior in Al Sacrificial Anodes [Volume 5, Issue 3, 2016, Pages 51-64]
SIMA process
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Simulation
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
Simulation
Simulation of Developed Texture During Warm Rolling of IF Steel [Volume 13, Issue 1, 2024, Pages 1-11]
Si Nanowire
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Single crystal cathode
Synthesis of Hydroxide Precursor Ni0.8Mn0.1Co0.1(OH)2 and Modeling the Effect of Ph on the Rate of Nucleation of Particles [Volume 12, Issue 2, 2023, Pages 75-90]
Single-walled carbon nanotubes
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Sinter
Microstructure Evaluation of Al-Mg-Sic Composite through Sintering by Microwave and Electrical Furnace [-2, 3*, 2009, Pages 219-230]
Sintered Welding Powder st37
Recycling of Deformed Powder from Submerge Arc Welding (SAW) [-3, 2*, 2008, Pages 115-127]
Sintering
Effect of Sintering Time and Temperature on 3Bi2O3-Y2O3 [-4, 1*, 2007, Pages 59-67]
Sintering
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Sintering
The effect of sintering temperature on microstructure and microwave dielectric properties of 0.88Ba([Zn0.6Co0.4]1/3,Nb2/3)O3–0.1Ba(Ga1/2Ta1/2)O3–0.02BaZrO3 ceramics [Volume 2, Issue 4, 2013, Pages 35-42]
Sintering
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Sintering
The effect of BaZrO3 addition on microstructure and microwave dielectric properties of (0.9-x)Ba([Zn0.6Co0.4]1/3,Nb2/3) O3–0.1Ba(Ga1/2Ta1/2)O3–xBaZrO3 ceramics with x=0-0.1 [Volume 4, Issue 1, 2015, Pages 55-62]
Sintering
Effect of addition of nano Magnesuim oxide on the mechanical properties of Alumina/ Silicon Carbides nano composites synthesized by mechanical alloying [Volume 5, Issue 1, 2016, Pages 45-49]
Sintering
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
Sintering
Investigating the Effects of Sintering Variables on Microstructure and Density of PZT Fibers Fabricated via Extrusion Process [Volume 12, Issue 2, 2023, Pages 55-73]
Sintering aid
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Sintering process
Synthesis and Sintering of Potassium Sodium Niobate Lead-Free Piezoelectric Ceramics [-1, 2*, 2010, Pages 175-184]
SiO2
Properties, type and amount of the final phases of alumina-zircon [Volume 5, Issue 1, 2016, Pages 25-32]
Slip casting
Slip Casting of Alumina-Fe Composite Under Magnetic Field [Volume 6, Issue 3, 2017, Pages 27-39]
Slip casting
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Small wind turbine
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Smart coating
Synthesis and Characterization of Microcapsules Containing Epoxy Resin (Epon 828) for Self-healing Coatings [Volume 6, Issue 2, 2017, Pages 1-8]
Smart Drug Delivery System
Formulation, Characterization and Evaluation of Quercetin-loaded Chitosan-functionalized Mesoporous Silica for Targeted Drug Delivery in Cancer Treatment [Volume 5, Issue 4, 2016, Pages 37-44]
SMAT
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
SMAW
Intercorrelation of Interpass Temperature – Base Metal Thickness – Microstructure and Cracking of Weld Metal Deposited from E8010-P1 Cellulosic Electrodes [Volume 4, Issue 4, 2015, Pages 27-35]
SnO2
The Study of Tl2O3َ Addition on Microstructure and Electrical Properties of High-voltage SnO2 Varistors [Volume 9, Issue 1, 2020, Pages 33-38]
SnO2
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Sno2 Ceramic
Calculation of the structure parameters of Tin dioxide in CaCl2 phase [-2, 1*, 2009, Pages 57-65]
SnO2/ZnO
Synthesis of SnO2/ ZnO Core- Shell Nanocomposites via Sonochemical Method and Evaluation of their Gas Sensing Properties [Volume 5, Issue 2, 2016, Pages 25-30]
SnO/ZnO
Effect of Synthesis Temperature on the Morphology and Particles Size of Sno/Zno Nanocomposites Synthesized Via Chemical Bath Deposition, CBD (RESEARCH NOTE) [-2, 4*, 2009, Pages 419-426]
Sodium nitrate
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Soft Chemistry
Effect of Synthesis Temperature on the Morphology and Particles Size of Sno/Zno Nanocomposites Synthesized Via Chemical Bath Deposition, CBD (RESEARCH NOTE) [-2, 4*, 2009, Pages 419-426]
Soft magnetic alloy
Effect of Hot Pressing on the Microstructure and Magnetic Properties of the Nanocrystalline Finemet alloy [Volume 4, Issue 1, 2015, Pages 47-54]
Soil loss
Prevent Soil loss by Copolymer Based on Polyacrylamide [Volume 4, Issue 4, 2015, Pages 63-69]
Soil resistivity
Effects of Soil Compositions on Corrosion of Gas Transferring Pipelines [-1, 4*, 2010, Pages 331-339]
Solar Cell
Characterization of Ni/Cu Contacts Based on Nickel Electrochemical Method for Multicrystalline Silicon Solar Cells [Volume 3, Issue 4, 2014, Pages 1-9]
Solar Cell
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
Solar Cell
Performance Improvement in Solution Based CuInS2 Solar Cell by Optimizing the Absorber Layer Deposition [Volume 10, Issue 1, 2021, Pages 45-52]
Sol gel
The Effect of acetyl acetone on the sol-gel synthesis of tetragonal zirconia nanopowder [Volume 2, Issue 2, 2013, Pages 1-10]
Sol gel
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Sol- gel
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Sol-Gel
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Sol-Gel
Synthesis of Lead TitanateZirconate Nano Powders via Sol-Gel Process and Investigation of DielectricProperties of the Sintered Pellets [Volume 2, Issue 1, 2013, Pages 49-54]
Sol-Gel
Preparation and Evaluation of Nanostructured Neodymium Titanate via Chemical Method [-1, 2*, 2010, Pages 107-115]
Sol-Gel
Preparation, Characterization and Bioactivity Evaluation of Sol–Gel Bioactive Glass Nano Powder with Three Different Compositions [-1, 3*, 2010, Pages 275-283]
Sol-Gel
The influence of sol-gel processing method on physical properties and acellular in vitro reactivity of bioactive glasses based on CaO-SiO2-P2O5: acidic catalysed single step process versus acid- base two step quick-gelling method [Volume 2, Issue 3, 2013, Pages 31-36]
Sol-Gel
Synthesis of Hydrophobic Silica Coatings on Glass by Sol-Gel and Studying Silver Oxide Effect on the Wettability [Volume 2, Issue 3, 2013, Pages 60-68]
Sol-Gel
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Sol-Gel
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Sol-Gel
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Sol-Gel
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Sol-Gel
Investigation of Sol-Gel Derived SiO2 - P2O5 – CaO- Na2O Bioactive Glass Using Various Precursors [Volume 4, Issue 3, 2015, Pages 9-16]
Sol-Gel
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Sol-Gel
Review of the Effect of Presence of Yttria and Benzotriazole Inhibitor Factor on Electrochemical Properties and Activation of Self-Healing Mechanism in Alumina-Based Coatings [Volume 7, Issue 4, 2018, Pages 75-92]
Sol-Gel
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Sol-Gel
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Sol-Gel
The Effect of Honey Addition on the Properties of CoFe2O4 Nanoparticles Synthesized by the Sol-Gel Auto-Combustion Method [Volume 11, Issue 4, 2022, Pages 1-18]
Sol-gel preparation
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Solidification cracks
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Solid Sate Synthesis
Synthesis and Characterization of LiNi0.5Co0.2Mn0.3O2 as a Cathode Material for Lithium Ion Batteries and Investigating the Effect of Calcination Temperature on Electrochemical Performance of Cathode [Volume 9, Issue 1, 2020, Pages 67-76]
Solid Solution
Synthesys of Cu-Al2O3 Metal Matrix Nano Composite From Cuo and Al Powders by Using High Energy Planetary Fast Milling [-2, 4*, 2009, Pages 401-410]
Solid State Reaction
Fabrication of Cordierite Glass Ceramic with the Use of Silicone Resin and Investigating Its Mechanical Properties [Volume 9, Issue 2, 2020, Pages 63-71]
Solid State Solar Cells
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Solidstate synthesis
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
Solution Combustion method
Effect of Calcination Temperature and Fuel to Oxidant Ratio for Synthesis of Li Ni0.5Mn0.3Co0.2 Cathode Powder for Li-ion Battery Via Solution Combustion Method [Volume 6, Issue 2, 2017, Pages 25-33]
Solution combustion synthesis
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Solution combustion synthesis
Electrochemical Performance of LiFePO4/C Powders Synthesized by Solution Combustion Method as the Lithium-Ion Batteries Cathode Material [Volume 11, Issue 1, 2022, Pages 81-93]
Solvent extraction
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Solvent free oxidation
Solvent Free Oxidation of Benzyl Alcohol to Benzaldehyde over RuO2/CeO2 Nano-Mixed Oxide [Volume 6, Issue 4, 2017, Pages 47-54]
Solvothermal
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Solvothermal
The Synthesis and Investigation of Magnetic Behavior of Magnetite Carbon Nanotubes Nanocomposite (Fe3O4-CNTs) for Water-Based
Convective Heat Transfer Application [Volume 6, Issue 4, 2017, Pages 55-62]
Sonochemical
The Effect of Synthesis Temperature on TiO2 Nanoparticles Prepared by Sonochemical Method [-1, 2*, 2010, Pages 167-173]
Sp3 bond
Investigating of Structural Evolution of Diamond-Like Carbon Thin Film Applied by Ion Beam Deposition Technology under the Effect of Substrate Temperature [Volume 11, Issue 3, 2022, Pages 31-42]
Spark Plasma Sintering
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Spark Plasma Sintering
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Spark Plasma Sintering
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Spark Plasma Sintering
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Spark plasma sintering (SPS)
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Specific capacitance
Supercapacitive properties of graphitic-carbon nitride deposited on reduced titanium dioxide porous nanostructured substrate [Volume 7, Issue 3, 2018, Pages 19-24]
Specific surface area
Removal of Cadmium (II) Using CoFe2O4 Powders Synthesized by Solution Combustion Method [Volume 7, Issue 1, 2018, Pages 11-17]
Spectroscopic Ellipsometry (SE)
Effect of substrate temperature on nanostructure zinc sulphide thin film in IR block applications [Volume 2, Issue 2, 2013, Pages 67-75]
Speed
Suggestion and Verification of a New Statistical Model for Wind Speed and Direction [-1, 2*, 2010, Pages 123-138]
Sphericity Number
Effect of Superheat Temperature on the Microstructure and Corrosion Behavior of Al-Zn-In Sacrificial Anode Produced by Semi-Solid Cooling Slope Casting [Volume 10, Issue 4, 2021, Pages 77-87]
Spinel
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Spinel
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
Spinel
Microstructure Evaluation of Al-Mg-Sic Composite through Sintering by Microwave and Electrical Furnace [-2, 3*, 2009, Pages 219-230]
Spinel
Electrophoretic deposition of CoFe2O4 coating for solid oxide fuel cellinterconnects [Volume 2, Issue 1, 2013, Pages 11-19]
Splat
Effect of plasma spray parameters on the microstructure anddielectric properties of barium titanate coating [Volume 3, Issue 2, 2014, Pages 1-9]
Splitter-Plate
Suppression of Vortex Shedding from Circular Cylinders Using Detached Short Splitter-Plates [-2, 3*, 2009, Pages 291-310]
SPPS
Effect of Precursor Concentration on the Microstructure of Aluminum Oxide Coating Made through the Solution Precursor Plasma Spray Process [Volume 11, Issue 1, 2022, Pages 1-12]
SPS
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]
SPS
Investigation of Addition of CNT and Sintering Process on Microstructure and Mechanical Properties of Al-Si3N4-CNT Nano Composite [Volume 9, Issue 1, 2020, Pages 39-48]
SPS
Production and Characterization of Hypoeutectic Al-Si Matrix Composite Reinforced with Metallic Glass Particles [Volume 12, Issue 3, 2023, Pages 79-91]
Sputtering target
The Effect of Sintering Process on Electrical and Microstructural Properties of Barium-Strontium-Titanate Sputtering Target and its Thin Film [Volume 6, Issue 3, 2017, Pages 79-85]
SrCoO3-δ
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
St14 Steel
Effect of Stand-Off Distance on the Shape and Microstructure of the Interface of Three-Layer Explosive Welding Of Ms90 Brass / St14 Steel/Ms90 Brass [-2, 1*, 2009, Pages 83-92]
Stabilization
Effect of yttria- dyspersia co-dopants on cubic phase stability of Bismuth oxide [Volume 2, Issue 2, 2013, Pages 59-65]
Staff Recovery
Development of Knowledge Management by Using of Human Resource Management Process [-2, 1*, 2009, Pages 1-10]
Stai less steel
Investigation of Step Annealing Heat Treatment on the Pitting Corrosion Resistance of Super Duplex Stainless Steel Welded Pipes [Volume 2, Issue 4, 2013, Pages 67-75]
Stainless steel
Synthesis and Corrosion Behavior of Nanostructure Cerium Oxide Coating on Stainless Steel [Volume 4, Issue 4, 2015, Pages 37-42]
Stainless steel
Optimization of Powder Injection Molding Process Parameter for Production SS316/TiC Composite for Biomedical Application [Volume 7, Issue 4, 2018, Pages 1-10]
Stainless steel
Effect of Copper Addition on the Microstructure, Hardness and Antibacterial Properties of Martensitic Stainless Steel (410s) [Volume 7, Issue 1, 2018, Pages 35-44]
Stand-Off Distance
Effect of Stand-Off Distance on the Shape and Microstructure of the Interface of Three-Layer Explosive Welding Of Ms90 Brass / St14 Steel/Ms90 Brass [-2, 1*, 2009, Pages 83-92]
Staphylococcus aureus
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Steel Filters
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Strength
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
Strength
Effect of Partitioning Time and Temperature during Q&P Process on Mechanical Properties of 1.5142 Steel [Volume 3, Issue 3, 2014, Pages 1-8]
Strontium
Mechanism of Strontium Adsorption on Nanostructured Hydroxyapatite in an Aqueous Solution [Volume 11, Issue 1, 2022, Pages 23-34]
Strontium titanate
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Structural properties
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Submerge Arc Welding (SAW)
Recycling of Deformed Powder from Submerge Arc Welding (SAW) [-3, 2*, 2008, Pages 115-127]
Substrate temperature
Investigating of Structural Evolution of Diamond-Like Carbon Thin Film Applied by Ion Beam Deposition Technology under the Effect of Substrate Temperature [Volume 11, Issue 3, 2022, Pages 31-42]
Sulfonated silk fibroin
Preparation and Characterization of Composite Bone Scaffold Based on Polycaprolactone and Sulfonated Silk Fibroin Nanofibers [Volume 10, Issue 1, 2021, Pages 75-84]
Sulfuric acid
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Sulfuric acid
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Sulfur mustard
Development of Optimized Potentials for Liquid Simulation (OPLS) Force Field to Sulfur Mustard in Order to Study its Adsorption on Graphene [Volume 6, Issue 4, 2017, Pages 33-38]
Superalloy
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
Supercapacitor
Deposition of Graphene Oxide Using Electrophoretic Method and Heat Treatment Temperature Effect on the Character of the Supercapacitor [Volume 5, Issue 3, 2016, Pages 41-50]
Supercapacitor
Pseudocapacitive Performance of Binder-Free Nickel Hydroxide Electrode Prepared by Layer-by-Layer Chemical Deposition on Nickel Foam [Volume 12, Issue 1, 2023, Pages 17-28]
Super Capacitor
Effect of Different Types of Electrochemical Methods on the Super Capacitor Properties of Thin Graphene Oxide Reduced by Electrochemical Method [Volume 9, Issue 2, 2020, Pages 35-42]
Supercapacitors
Synthesis, characterization and electrochemical performance of ZnxNi1-x(OH)2 nanostructured layered double hydroxide active material for supercapacitors [Volume 5, Issue 1, 2016, Pages 17-24]
Supercapacitors
Synthesis, Characterization and Electrochemical Performance of Nanostructured Cobalt Oxide and Nickel Cobalt Oxide Active Materials for Supercapacitors [Volume 6, Issue 3, 2017, Pages 61-68]
Supercapacitors
Hydrothermal Synthesis and Pseudocapacitive Performance of β-NiMoO4 Nanorods [Volume 10, Issue 3, 2021, Pages 57-65]
Supercapacitors
Chemical Deposition of Nickel Hexacyanoferrate Nanoparticles on a Stainless-Steel Mesh Substrate for Supercapacitor Application [Volume 11, Issue 2, 2022, Pages 45-56]
Superelasticity
Effect of Aging Treatment on Tensile and Superelastic Behavior in Ni-Rich NiTi Alloy (50.9 Atom%Ni) [-2, 3*, 2009, Pages 231-240]
Superelasticity
Effect of Pore Content on Mechanical Properties of Porous Nitinol under Compressive Loading [Volume 2, Issue 2, 2013, Pages 45-52]
Superparamagnetic
Drug Loading and Release Behavior of Graphene Oxide/Magnetite Nanocomposite [Volume 6, Issue 1, 2017, Pages 33-41]
Surface Area
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Surface hydrophobic
Synthesis of Hydrophobic Silica Coatings on Glass by Sol-Gel and Studying Silver Oxide Effect on the Wettability [Volume 2, Issue 3, 2013, Pages 60-68]
Surface modification
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Surface modification
Surface Modification of Carbonaceous Adsorbents for Removal of Nitrate from Water [Volume 6, Issue 2, 2017, Pages 65-77]
Surface modification
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Surface morphology
Optimization of Porous Structures Based on Polypropylene Fumarate /Hydroxy Ethyl Metacrylate/ Bioactive Glass Prepared by Biomimetic Methods with Mechanical Strength and Surface Morphology Analyses [Volume 6, Issue 4, 2017, Pages 11-24]
Surface morphology
Effect of Different Types of Electrochemical Methods on the Super Capacitor Properties of Thin Graphene Oxide Reduced by Electrochemical Method [Volume 9, Issue 2, 2020, Pages 35-42]
Surface plasmon resonance
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
Surface splats
Investigation of Oxidation Mechanism of HVOF-CoNiCrAlY Coating in Early Stages of Application [Volume 5, Issue 4, 2016, Pages 53-63]
Surfactant
Synthesis and Characterization of Dandelion-Like Hydroxyapatite Via a Miclle-Directed Hydrothermal Method [-2, 3*, 2009, Pages 255-262]
Surfactant
Synthesis, Characterization and Investigation of Properties of Nanoemulsion Persian Cumin Essential Oil [Volume 7, Issue 2, 2018, Pages 49-56]
Surfactant Agent
The Effect of Surfactant Agents on the Oxidation and Slag Corrosion Resistances of the Self-Flowing Refractory Castables in BF Troughs [-1, 2*, 2010, Pages 151-159]
Synthesis
Synthesis and Characterization of Dandelion-Like Hydroxyapatite Via a Miclle-Directed Hydrothermal Method [-2, 3*, 2009, Pages 255-262]
Synthesis
Effect of Crystallization Time for Synthesis of Nanosized Sodalite Zeolite from Rice Husk Ash [-1, 2*, 2010, Pages 161-166]
Synthesis
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Synthesis
Evaluation of Microstructural and Antibacterial Properties of Graphene Oxide Synthesized by Green Method [Volume 9, Issue 3, 2020, Pages 51-61]
Synthesis
Synthesis and Characterization of Alpha-Tricalcium Phosphate and Its Single-Component Cement [Volume 11, Issue 2, 2022, Pages 1-12]
T
Taguchi
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
Tailings
New Applications of Mica Clay Minerals and Characterization Determination of GolGohar Iron Ore Mine Tailings Phlogopite [Volume 5, Issue 3, 2016, Pages 65-72]
TaN
Investigation of Antibacterial Properties of TaN-(Ag/Au) Nanocomposite Thin Films Using Surgical Instruments [Volume 4, Issue 2, 2015, Pages 47-51]
Tantalum carbide
Investigation of Mechanical Properties and Microstructure of WC-10%Wtco Containing Tac Grain Growth Inhibitor [-2, 4*, 2009, Pages 391-399]
TEM
Improvement of Practical Properties of Wood Polymer Composite with Nanoclay Particles [-2, 4*, 2009, Pages 369-377]
TEM
Study of Effects of Copper Content and Cold Work on Microstructure and Aging Behavior of َAl based [Volume 6, Issue 2, 2017, Pages 79-85]
Temperature effect
The Effect of Temperature on the Electrowinning of Antimony from Alkaline Sulfide Solution [Volume 9, Issue 4, 2020, Pages 47-58]
Template
Synthesis and Characterization of Dandelion-Like Hydroxyapatite Via a Miclle-Directed Hydrothermal Method [-2, 3*, 2009, Pages 255-262]
Tensile Tests
Effect of Aging Treatment on Tensile and Superelastic Behavior in Ni-Rich NiTi Alloy (50.9 Atom%Ni) [-2, 3*, 2009, Pages 231-240]
TeO2
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Terrestrial Laser Scanner
A Novel Idea on Automatic Network Design for Terrestrial Laser Scanner [-4, 1*, 2007, Pages 13-24]
Texture
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
Texture
Texture Analyses of Friction Stir Welded Single-phase Brass Using Electron Back Scattered Diffraction [Volume 6, Issue 2, 2017, Pages 17-24]
Texture
Simulation of Developed Texture During Warm Rolling of IF Steel [Volume 13, Issue 1, 2024, Pages 1-11]
Thermal Barrier Coating (TBC)
Modification of Plasma Spray Parameters of NiCrAlY Nano Particles for Achievement of Nano Structure TBC [Volume 4, Issue 4, 2015, Pages 1-10]
Thermal Chemical Vapor deposition
Study on the Optical Properties of WS2 Thin Films Annealed in Various Atmospheres Including Ar, Ar/H2, NH3/H2O, and O2 [Volume 11, Issue 4, 2022, Pages 45-54]
Thermal conductivity
Hydroxyapatite Bioceramic Heat Transfer Comparison in Water and Simulated Body Fluid after Addition of Carbon Nanotube [Volume 11, Issue 1, 2022, Pages 95-105]
Thermal cycle
The Effect of Thermal Cycles on the Impact Performance of Carbon Fibers-Epoxy/Aluminum Fibers Metal Laminates [Volume 11, Issue 3, 2022, Pages 1-14]
Thermal decomposition
Synthesis and Characterization of Co-Zn Ferrite Nanoparticles Embedded in a Thermo-Sensitive Polymer [Volume 7, Issue 4, 2018, Pages 51-57]
Thermal Decomposition Method
Synthesis of Manganese Oxide Nanoparticles Using Thermal Decomposition Method [Volume 9, Issue 1, 2020, Pages 57-65]
Thermal Method
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Thermal shock
Thermal shock behavior study of the micro and nano structured alumina/aluminum titnate composites prepared by in-situ reaction sintering [Volume 7, Issue 3, 2018, Pages 25-33]
Thermal shock resistance
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Thermal stability
Microstructural Evolution of Nanostructured Al-Mg Powder System During Ball Milling and Post Heat Treatment Processes [Volume 6, Issue 2, 2017, Pages 35-43]
Thermodynamic Modeling
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Thermogravimetry
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Thermomechanical
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Thermosyphon
The Effect of Fill Ratio on Performance and Heat Transfer Coefficient of Thermosyphons Evaporator and Condenser [-2, 1*, 2009, Pages 40-50]
The Wenner 4-point Method
Effects of Soil Compositions on Corrosion of Gas Transferring Pipelines [-1, 4*, 2010, Pages 331-339]
Thin film
Investigation of Electrolyte Dependence on Electrochromic Properties of Electrodeposited Fe2O3 Thin Film [Volume 4, Issue 3, 2015, Pages 39-44]
Thin film
Enhanced Surface Adhesion of Graphene Oxide Thin Film on Hydrophobic Silicon Substrate [Volume 7, Issue 1, 2018, Pages 29-33]
Thin film
Comparison of Optical and Electrical Properties of TeO2 Nanostructure Thin Films Before and After Gamma Radiation [Volume 10, Issue 2, 2021, Pages 71-82]
Thin films
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Thin films
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Thin films
Investigation of Microstructure and Ferroelectric Domain of Epitaxial PbTiO3 Thin Film Grown by Liquid Phase Deposition [Volume 9, Issue 2, 2020, Pages 73-79]
Thioindigo
The Synthesis of Two New Dye based on Thioindigo and Investigation of their Properties in Dye-Sensitized Solar Cells [Volume 4, Issue 1, 2015, Pages 39-45]
Three-dimensional Graphene
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Three-dimensional Graphene
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
Ti
Evaluation of Microstructure and Mechanical Properties of Ti-Al2O3 Nano-Composites Fabricated by Friction Stir Processing [Volume 4, Issue 1, 2015, Pages 1-11]
Ti
Investigation of Titanium Effects on the Behavior and Corrosion Mechanism of Hadfield Steel By Using Electrochemical Tests and Electron Microscopy Studies [Volume 6, Issue 4, 2017, Pages 63-71]
Ti-48Al/Ti2AlC composite
Investigation of Niobium Addition Effect on Oxidation Resistance of Ti-48Al/Ti2AlC Composite [Volume 4, Issue 1, 2015, Pages 21-30]
Ti-6Al-4V alloy
Investigation of severe plastic deformation effect on microstructure of Ti-6Al-4V alloy [Volume 5, Issue 1, 2016, Pages 59-64]
Ti-6Al-4V alloy
Effect of Graded Coating on the Nanoindentation Properties of HA/Ti Composite Coatings Synthesized by Mechanical Coating Technique on Ti-6Al-4V Substrate [Volume 12, Issue 4, 2023, Pages 38-47]
TiAlCN
Characterization of Nanostructure Coatings of Ti-Al-C-N System Deposited Using Plasma Assisted Chemical Vapor Deposition [Volume 9, Issue 1, 2020, Pages 19-31]
Ti and Sn doped hematite
Hydrothermal synthesis of hematite nanoparticles doped with (Ti and Sn) and deposition on FTO [Volume 7, Issue 3, 2018, Pages 11-18]
TiC
Mechanical Assessment of AZ31/TiCnano-composite surface layer fabricated using friction stir processing [Volume 2, Issue 4, 2013, Pages 43-52]
TiCl4
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
Tilted cavity
Numerical Study of Effect of Applying a Magnetic Field on Natural Convection in a Tilted Square Cavity with Constant Temperature Sidewalls [-1, 3*, 2010, Pages 249-265]
Tin oxide nanoparticles
Deposition pattern Of Tin Oxide Nanoparticles Under Non-uniform AC Electric Fields [Volume 5, Issue 1, 2016, Pages 11-16]
TiO2
Fabrication and characterization of dye-sensitized solar cell based on ordered mesoporous TiO2 films [Volume 3, Issue 1, 2014, Pages 21-27]
TiO2
The Effect of Time and TiCl4 Salt Concentration on the Nano TiO2/Carbon Composite Microspheres Morphology Synthesized by Solvothermal Method [Volume 3, Issue 2, 2014, Pages 63-70]
TiO2
Preparation of Polyaniline – Carboxymethyl Cellulose – TiO2 hybrid nanocomposite and Investigation of its physicochemical and Antibacterial Properties [Volume 5, Issue 2, 2016, Pages 31-39]
TiO2
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
TiO2
Structural Optimization of Cordierite Ceramics Prepared via Cold Isostatic Pressing of Polymer and TiO2 [Volume 10, Issue 3, 2021, Pages 35-44]
TiO2/MgO coating
Investigation of Properties of TiO2/MgO Dual Layer Thin Film Formed by Magnetron Sputtering on Mg Alloy [Volume 9, Issue 3, 2020, Pages 1-9]
TiO2 nanotubes
Evaluation of the Effect of Annealing Temperature on Photocatalytic Properties of TiO2 Nanotubes Modified with Gold and Silver metals [Volume 6, Issue 2, 2017, Pages 9-15]
TiO2/PVP Nanofibers
Effects of Rotating Drum and Polymer Concentration on Morphology of Electrospun TiO2/PVP Nanofibers [Volume 9, Issue 4, 2020, Pages 59-69]
TiO2-SnO2
Preparation of nanostructured TiO2-SnO2 films by aqueous sol-gel for gas sensor application [Volume 3, Issue 1, 2014, Pages 45-53]
Tissue engineering
Preparation, Characterization and Bioactivity Evaluation of Sol–Gel Bioactive Glass Nano Powder with Three Different Compositions [-1, 3*, 2010, Pages 275-283]
Tissue engineering
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Tissue engineering
Preparation of Nanocomposite Fibrous Scaffolds of Poly-3-hydroxybutyrate/Bioactive Glass by Electrospinning Method for Bone Tissue Engineering [Volume 3, Issue 4, 2014, Pages 11-19]
Tissue engineering
Evaluation of physical and mechanical properties of electrospinning nanocomposite scaffolds poly ɛ-caprolactone-gelatin/multi walled carbon nanotube [Volume 7, Issue 4, 2018, Pages 93-100]
Tissue engineering
E-Design and Fabrication of 3D-Printed Polycaprolactone/Poly Lactic-co-Glycolic Acid Hybrid Scaffold Containing Alginate Nanoparticles for Cartilage Tissue Engineering Applications [Volume 11, Issue 3, 2022, Pages 57-74]
Tissue engineering
An overview of the Application of Eggshell Membrane in the Production of Engineered Wound Dressing: structure, characteristics and modification [Volume 13, Issue 1, 2024, Pages 12-30]
Titania
Preparation and Characterization of Nanostructure Titania Colloidal Membranes [-3, 2*, 2008, Pages 163-174]
Titania
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Titanium
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Titanium
Anodizing Of Titanium in Acidic Electrolytes and Evaluation of Its Corrosion Resistance in PBS Physiologic Solution [-2, 1*, 2009, Pages 11-20]
Titanium
The Effect of Concentration of Calcium Phosphate Salts on Morphology and Nanostructure of Hydroxyapatite Coating on Titanium with Thermal - Electrodeposition Method [-1, 4*, 2010, Pages 285-292]
Titanium
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Titanium
Evaluation Of Corrosion Resistance Of Electrophoretic-deposited HA-Cu And HA-CuO Nanocomposite Coatings On Ti6Al4V [Volume 5, Issue 1, 2016, Pages 53-58]
Titanium
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Titanium
Investigation of the Effect of Electrolyte on Microstructure and Morphology of the Plasma Electrolytic Oxidation Coatings on Ti [Volume 10, Issue 3, 2021, Pages 45-55]
Titanium Aluminide
Removing of the Niobium Rich Inclusions from Microstructure of a New Titanium Aluminide Intermetallic Alloy [-1, 2*, 2010, Pages 97-106]
Titanium Boride
Study on Ceramic Composite TiB/TiB2 Coating Mechanism on Commercial Pure Titanium and Its Osteoconduction [Volume 7, Issue 3, 2018, Pages 35-42]
Titanium Carbide
The effect of TiC additive on microstructure and final properties of microwave and conventional sintered Al-SiC composite [Volume 2, Issue 3, 2013, Pages 42-49]
Titanium Carbide
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Titanium diboride
The Synthesis mechanism of B4C-TiB2 composite with spark plasma sintering [Volume 3, Issue 2, 2014, Pages 51-61]
Titanium diboride
Investigation on the Microstructure and Tensile Properties of Al5083-TiB2 Nanocomposites Produced by Stir Casting Method [Volume 10, Issue 2, 2021, Pages 45-57]
Titanium dioxide
The Effect of Synthesis Temperature on TiO2 Nanoparticles Prepared by Sonochemical Method [-1, 2*, 2010, Pages 167-173]
Titanium dioxide
Characterization and Comparison of the Nanostructured Heterogenous TiO2/Al2O3 and TiO2 Films [Volume 3, Issue 2, 2014, Pages 91-99]
Titanium dioxide
Evaluation of Physical and Mechanical Properties of Hydroxyapatite/Titanium dioxide Composite Scaffold for Tissue Engineering Applications [Volume 3, Issue 3, 2014, Pages 17-26]
Titanium dioxide nanoparticles
Evaluation of the Effect of Titanium Dioxide Nanoparticles on MDR Bacteria In Vitro and Male Wistar Rats Liver In Vivo [Volume 11, Issue 1, 2022, Pages 55-68]
Titanium Nitride
Effect of Annealing Temperature on Structural Properties of Nanostructured TiN-3DG Composite Synthesized by Chemical Method [Volume 4, Issue 1, 2015, Pages 13-19]
Titanium oxide nanoparticles
Investigation of Antibacterial Properties of Titanium Dioxide Nano Colloids on the Surface of Historical Cotton Fabrics [Volume 10, Issue 3, 2021, Pages 15-24]
Titanium silicide
Effect of substitution of Si by Al on the structural and microstructural properties of nano Ti5Si3 based alloys prepared by MASHS [Volume 3, Issue 3, 2014, Pages 9-16]
Titanomagnetite
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Tl2O3 addition
The Study of Tl2O3َ Addition on Microstructure and Electrical Properties of High-voltage SnO2 Varistors [Volume 9, Issue 1, 2020, Pages 33-38]
TM Mineral Powder
Evaluation of Microstructure and Wear Behavior of Iron-Titanium Composition Coating Applied by HVOF Process [Volume 9, Issue 4, 2020, Pages 13-21]
TOA
Protonation of Trioctylamine(TOA) With Sulfuric Acid [Volume 3, Issue 1, 2014, Pages 81-91]
Training
Influence of Ti Content on Shape Memory Effect of Trained Niti Alloy under Thermomechanical Cycles [-2, 4*, 2009, Pages 335-340]
Transesterification
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
Transient liquid phase bonding
Phase and Microstructural Evolutions and Fracture Behavior of Nimonic 75 Transient Liquid Phase Joints at Different Temperatures [Volume 9, Issue 3, 2020, Pages 37-49]
Transmission
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Transmission Spectra
Improving Electronic Parameters of Silicon Nanowires by Arsenic and Phosphor dopants [Volume 4, Issue 4, 2015, Pages 11-17]
Transmittance
Effect of Aging on the Electrical Conductivity of Tin Oxide Thick Film in Presence of Ethanol [-4, 1*, 2007, Pages 95-105]
Transparency
The Effect of pH and Calcination on the Optical Transmittance of SPS Alumina Ceramics [Volume 12, Issue 2, 2023, Pages 1-11]
Transverse rupture strength
Effect of Sintering Time on Mechanical and Magnetic Properties of Cemented Carbides [Volume 3, Issue 1, 2014, Pages 1-8]
Triangular structure
Synthesis and evaluation of triangular shaped silver nanoparticles on antibacterial properties of gram-positive and gram-negative bacterium [Volume 2, Issue 4, 2013, Pages 61-66]
Tri hydrate Magnesium hydrogen Phosphate
Synthesis and Investigation of Composite of Magnesium OxyChloride and Tri hydrate Magnesium Hydrogen Phosphate with Nano Silica [Volume 2, Issue 1, 2013, Pages 81-89]
Triple-Phase Contact Line
Triple-Phase Contact Line in Partial Wetting: Theories, Experimental Measurements, and Nanoscopic Approach [Volume 10, Issue 4, 2021, Pages 9-23]
Tube bundles
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Tundish
Optimization of fluid flow pattern of molten steel in the steelmaking tundish for clean steel production and optimum intermix amount [Volume 2, Issue 3, 2013, Pages 11-23]
Tungsten
Study and Specification of Optimal Liquid Phase Sintering Temperature for Production of Tungsten-Copper Composite [Volume 4, Issue 2, 2015, Pages 63-69]
Tungsten Carbide
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Tungsten Carbide-Cobalt
Investigation of Mechanical Properties and Microstructure of WC-10%Wtco Containing Tac Grain Growth Inhibitor [-2, 4*, 2009, Pages 391-399]
Tungsten oxide
Investigation of Photocathodic Porotection Properties of TiO2/WO3 Coatings Prepared by Sol-Gel [Volume 3, Issue 3, 2014, Pages 49-57]
Tungsten oxide
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
Tungsten silicide
Preparation and Characterization of Tungsten Silicide Cladding on Carbon Steel [Volume 5, Issue 4, 2016, Pages 29-36]
Tungsten sulfide
Study on the Optical Properties of WS2 Thin Films Annealed in Various Atmospheres Including Ar, Ar/H2, NH3/H2O, and O2 [Volume 11, Issue 4, 2022, Pages 45-54]
Two-Dimensional Organic-Inorganic Hybrid
Enhancing the Luminosity of Two-Dimensional Organic-Inorganic Hybrids with Coating by Gold and Platinum Thin Films at Low Temperatures [Volume 11, Issue 4, 2022, Pages 12-23]
Two-Phase Aqueous System
Investigation of the Effect of Different Parameters on the Separation of Lead, Arsenic, and Cadmium Ions from Wastewater using Aqueous Two-Phase Systems [Volume 12, Issue 2, 2023, Pages 29-38]
Two Steps Austempering
Development of Nanostructured Bainitic Steel by Utilizing the Two Steps Austempering Heat Ttreatment [Volume 5, Issue 4, 2016, Pages 11-17]
Two-Step Solid-State Synthesis
Synthesis of PZT by Two-Step Solid State Reaction and Evaluation of the Effect of Nb2O5 Doping on Its Electrical Properties [Volume 11, Issue 4, 2022, Pages 55-64]
Two-Way Shape Memory Effect
Effect of Constrained Ageing on Orthodontic Wires for Changing Their Control to Reinforcements in Smart Metal/Polymer Composite [-2, 1*, 2009, Pages 28-39]
U
Ultra-fine grains
Assessment Of Dissimilar 6061-T6 Al/DP590 Dual Phase Steel Welds Produced Using Friction Stir Spot Welding [Volume 5, Issue 1, 2016, Pages 1-10]
Ultra high temperature ceramics
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
Ultra Low Cement Castables
An Investigation on the Fabrication and Properties of Ultra Low Cement Cordierite Mullite Refractory Castables [-1, 4*, 2010, Pages 309-317]
Ultrasonic System
Fabrication Ohmic Contact of Ni/Cu Structure on Polycrystalline Silicon Via Electrochemical Method used in Solar Cells [-3, 2*, 2008, Pages 183-190]
Urtica diocia
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Used cooking oil
Application of MgO nano-catalyst in catalytic production of Biodiesel [Volume 2, Issue 1, 2013, Pages 65-70]
V
Vacuum Arc Remelting
Synthesis and Characterization of Cerium rich MmNi3.55Co0.75Mn0.4Al0.3 for Ni-MH battery applications [Volume 6, Issue 3, 2017, Pages 9-16]
Vanadium
Process Design of Titanomagnetite Placer Mine Beneficiation for Co-Extraction of Vanadium, Titanium and Iron Elements [Volume 4, Issue 2, 2015, Pages 27-36]
Vanadium
Determination of Vanadium by Optical Sensing Film [Volume 5, Issue 3, 2016, Pages 25-32]
Vanadium carbide
Synthesis and Characterization of the Composite Co/VC Nano Powder by Mechanochemical Method and Investigating the Reaction Thermodynamic Behavior [Volume 4, Issue 3, 2015, Pages 45-52]
Vanadium pantoxide
The effect of V2O5 addition on the microstructure and mechanical properties of Al-V2O5 composites prepared by spark plasma sintering [Volume 7, Issue 3, 2018, Pages 43-54]
Varistor
The Study of Tl2O3َ Addition on Microstructure and Electrical Properties of High-voltage SnO2 Varistors [Volume 9, Issue 1, 2020, Pages 33-38]
Ventilation
Numerical Simulation of Natural Ventilation and Cooling a Building by Combined Wind tower and Solar Chimney [-1, 4*, 2010, Pages 301-308]
Vibrating Sample Magnetometer (VSM)
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
Vibration during installation
Investigation of Effective Parameters on The Properties Of The High Strong Chamotte Based Low –Cement Refractory Castable [-1, 3*, 2010, Pages 225-231]
Vibrocast
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Viscosity
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Vortex Shedding
Suppression of Vortex Shedding from Circular Cylinders Using Detached Short Splitter-Plates [-2, 3*, 2009, Pages 291-310]
W
Warm rolling
Simulation of Developed Texture During Warm Rolling of IF Steel [Volume 13, Issue 1, 2024, Pages 1-11]
Warm Torsion
Simulation of Texture Evolution during Warm Torsion of IF Steel [Volume 6, Issue 1, 2017, Pages 53-59]
Wash-out
The Effect of Bioactive Glass Synthesis Method on the Flowability and Structural Stability of the Injectable Pastes Prepared from It [Volume 12, Issue 1, 2023, Pages 1-15]
Wastewater Treatment
Methylene Blue Removal from Aqueous Solution Using Zein-Modified Kaolin [Volume 9, Issue 2, 2020, Pages 53-61]
Water vapor
Numerical Simulation of Natural Ventilation and Cooling a Building by Combined Wind tower and Solar Chimney [-1, 4*, 2010, Pages 301-308]
Watts Bath
The Creation of Nanocomposite Ni-B4C Coatings on Cu by Electrocodeposition and Investigation of Corrosion Behavior [Volume 3, Issue 4, 2014, Pages 53-61]
WC-Co nanopowder
Optimization of the Production Process in Cobalt-Tungsten Carbide Nanopowder by Mechanical Milling [Volume 7, Issue 1, 2018, Pages 19-27]
Wear
Investigating effect of CuO and TiO2 Nano Particles on Tribological Characteristics of Engine Oil [Volume 3, Issue 4, 2014, Pages 71-76]
Wear
Improvement of Tribology Properties St37 Steel by Formation of Composite Layer Containing Alumina Particles by GTAW Welding Method [Volume 4, Issue 2, 2015, Pages 53-61]
Wear
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Wear
Effect of WC Addition on the Wear Resistance of Mullite-WC Composites Sintered by Spark Plasma Sintering [Volume 12, Issue 1, 2023, Pages 57-69]
Wear resistance
Effect of Cryotreatment on Microstructure and Wear Properties of Cold Work Tool D6 Steel [-3, 2*, 2008, Pages 137-152]
Wear resistance
Effect of Sintering Temperatures on Mechanical and Electrochemical Properties of Sol–Gel Alumina Coatings Applied on Carbon Steel [Volume 6, Issue 1, 2017, Pages 23-31]
Weldability
Comparison of the Effect of Pulsed Nd:YAG and Continuous Wave Fiber Laser on the Microstructure, weld Geometry and Weldability of Inconel 718 Superalloy [Volume 7, Issue 4, 2018, Pages 37-49]
Well plate
Evaluation of the Effect of Titanium Dioxide Nanoparticles on MDR Bacteria In Vitro and Male Wistar Rats Liver In Vivo [Volume 11, Issue 1, 2022, Pages 55-68]
Wet ability
Study of the effect of silica nanoparticles on the conservative properties of acrylic coatings [Volume 2, Issue 3, 2013, Pages 69-78]
Wet chemical method
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
Wetting
Synthesis of Hydrophobic Silica Coatings on Glass by Sol-Gel and Studying Silver Oxide Effect on the Wettability [Volume 2, Issue 3, 2013, Pages 60-68]
Wetting
On the substrate wettability of a tungsten sol for the preparation of WO3 thin films [Volume 3, Issue 4, 2014, Pages 63-69]
WIEN2k
Optical Properties of PbTiO3 in Paraelectric Phase [-1, 3*, 2010, Pages 193-199]
Wind blowing
Numerical Simulation of Natural Ventilation and Cooling a Building by Combined Wind tower and Solar Chimney [-1, 4*, 2010, Pages 301-308]
Wind Energy Conversion System
Suggestion and Verification of a New Statistical Model for Wind Speed and Direction [-1, 2*, 2010, Pages 123-138]
Wistar rats
Evaluation of the Effect of Titanium Dioxide Nanoparticles on MDR Bacteria In Vitro and Male Wistar Rats Liver In Vivo [Volume 11, Issue 1, 2022, Pages 55-68]
Withdrawal Rate Mold
The Effect of Withdrawal Rate on the Microstructural Defects of a New Cobalt-nickel Based Directionally Solidified Superalloy [Volume 12, Issue 4, 2023, Pages 15-23]
WO3
Synthesis and Optimization of Planar Perovskite Solar Cells Using TiO2/SnO2, TiO2/WO3 and SnO2/WO3 Electron Transport Bilayer Structures [Volume 10, Issue 1, 2021, Pages 1-12]
Wollastonite
Production of Glass-Ceramics from Slag of Iron Alloyed Steel [Volume 2, Issue 2, 2013, Pages 23-31]
Wollastonite
Synthesis of Bioactive and Biodegradable Gelatin/Wollastonite Nanocomposite for the Delivery of Gentamicin [Volume 12, Issue 4, 2023, Pages 48-60]
Wood
Acidification of historical wood works by using calcium hydroxide nanoparticles synthesized via chemical processing [Volume 3, Issue 1, 2014, Pages 71-79]
Wood
Materials and Manufacturing Techniques of Small Horizontal Axis Wind Turbine Blade [Volume 10, Issue 3, 2021, Pages 1-13]
Wool fiber
Examination of the effect of colloidalsilvernanoparticles on the fibers of handmade carpets dyed by madder dye against biological and natural factor [Volume 2, Issue 2, 2013, Pages 53-57]
Work Function
Synthesis and Electrical Properties Evaluation of Three-Dimensional Graphene [Volume 4, Issue 3, 2015, Pages 17-23]
X
X and Ku band
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Xanthan Gum
Fabrication and Characterization of Xanthan Film Containing Spirulina Extract with Continues Release Capability for Use in Wound Healing [Volume 12, Issue 4, 2023, Pages 1-14]
X-ray diffraction
Determination of Optimal Method for Extraction of Amorphous Silica from Rice Husk as an Agricultural Waste [-1, 4*, 2010, Pages 357-363]
X-ray diffraction (XRD)
An Investigation of the Structural, Morphological, Optical, and Magnetic Properties of Electrospun Co3O4 Fibres [Volume 9, Issue 3, 2020, Pages 19-25]
X-ray diffraction (XRD)
Investigation of Hydroxyapatite Production from Yellow Fish Bones by Hydrothermal Method [Volume 10, Issue 3, 2021, Pages 25-33]
X-ray Fluorescence
Determination of Optimal Method for Extraction of Amorphous Silica from Rice Husk as an Agricultural Waste [-1, 4*, 2010, Pages 357-363]
XRD
Improvement of Practical Properties of Wood Polymer Composite with Nanoclay Particles [-2, 4*, 2009, Pages 369-377]
XRD
Study on AA7010 aluminum alloy processed by mechanical alloying [Volume 2, Issue 3, 2013, Pages 1-10]
XRD
Technical study of stucco ornamens in "Shah-shahan" house using XRD, SEM and wet chemistry [Volume 3, Issue 2, 2014, Pages 37-49]
XRD
The Effect of Synthesis Route on the Microstructure and Dielectric Properties of Bulk (K0.44-Na0.52Li0.04)(Ta0.1Sb0.06Nb0.84)O3 Piezoceramics [Volume 4, Issue 2, 2015, Pages 11-17]
Y
YAG Polycrystalline Ceramic
The Effect of Milling Time and Rheological Properties to Achieve the Homogenize Phase and Microstructure of Poly Crystalline Yttrium Aluminum Garnet Ceramic [Volume 6, Issue 4, 2017, Pages 39-46]
Yettria Stabilized Zirconia
Effect of Sintering Temperature on Properties of Fused Silica- YSZ Composite Prepared by Spark Plasma Sintering [Volume 11, Issue 3, 2022, Pages 75-84]
Yittrium Oxide
Effect of Sintering Time and Temperature on 3Bi2O3-Y2O3 [-4, 1*, 2007, Pages 59-67]
Yttrium
Study of the effect of praseodymium and neodymium on adsorption properties for active gases in non-evaporable Zr-Co base chemical getter and comparing them with yttrium [Volume 7, Issue 3, 2018, Pages 55-65]
Yttrium dopant
Synthesis of nanocrystalline Sr0.895Y0.07TiO3±δ by sol-gel method [Volume 3, Issue 2, 2014, Pages 11-18]
Yttrium Oxide
Effect of Yttrium Additive Oxide on Phase Stability of Bismuth Oxide [-4, 1*, 2007, Pages 69-76]
Z
Zeolite
Effect of Crystallization Time for Synthesis of Nanosized Sodalite Zeolite from Rice Husk Ash [-1, 2*, 2010, Pages 161-166]
Zeolite
Optimization of Nitrate Removal from Aqueous Solutions with ZSM Hierarchical Zeolite Modified with Amine Using Response Surface Method [Volume 10, Issue 1, 2021, Pages 13-23]
Zeta potential
Simulation of Electrophoretic Deposition of Ceramic Nanoparticles Using a Modified Particle-Based Model: Considering the Effect of the Surface Potential of Particles [Volume 12, Issue 1, 2023, Pages 70-85]
Zhs6u superalloy
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
ZIF-8
Determination of Dielectric and Optical Properties of Zeolitic Imidazolate Framework-8 (ZIF-8) by Reflection Electron Energy Loss Spectroscopy (REELS) [Volume 10, Issue 4, 2021, Pages 1-7]
Zinc Doping
Synthesis of Polycaprolactam/Zinc Doped Hydroxyapatite Nanofibers via Electrospinning [Volume 3, Issue 3, 2014, Pages 59-66]
Zinc oxide
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Zinc oxide
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Zinc oxide
Fabrication and Characterization of Gelatin/Chitosan/Zinc Oxide Nanocomposite Hydrogels Intended for Biomedical Applications [Volume 11, Issue 2, 2022, Pages 57-69]
Zinc oxide nanoparticles
Synthesis of Zinc Oxide Nanoparticles from 2-Methoxy Ethanol via Chemical Bath Deposition [-2, 4*, 2009, Pages 411-417]
Zinc sacrificial anode
Investigation of the Effects of SIMA Process on Microstructure and Electrochemical Behavior of Zn Sacrificial Anode in Simulated Sea Water [Volume 6, Issue 3, 2017, Pages 69-77]
Zinc Sulfide
Hydrothermal Synthesis of Nano Zns: An Investigation about the Effects of Synthesis Period on Particles Morphologies [-1, 3*, 2010, Pages 267-273]
Zinc Sulfides nanoparticles
Hydrothermal Synthesis of Nano Zns: An Investigation about the Effects of Synthesis Period on Particles Morphologies [-1, 3*, 2010, Pages 267-273]
Zinc Sulphide nanoparticles
Effect of substrate temperature on nanostructure zinc sulphide thin film in IR block applications [Volume 2, Issue 2, 2013, Pages 67-75]
Zinc-Tin electroplating
Effect of Coating Processes Parameters on Structure and Micro Hardness of Zn-Sn Alloy Coating Via Electroplating [Volume 4, Issue 2, 2015, Pages 1-9]
Zircon
Properties, type and amount of the final phases of alumina-zircon [Volume 5, Issue 1, 2016, Pages 25-32]
Zirconia
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Zirconia
The Effect of acetyl acetone on the sol-gel synthesis of tetragonal zirconia nanopowder [Volume 2, Issue 2, 2013, Pages 1-10]
Zirconia
Properties, type and amount of the final phases of alumina-zircon [Volume 5, Issue 1, 2016, Pages 25-32]
Zirconia
Fabrication of Zirconia Crucible Using Low-Pressure Injection Molding Process & Investigation of Effective Parameters [Volume 12, Issue 3, 2023, Pages 65-77]
Zirconia
Investigating the Effect of Solid Load on The Process of Low-Pressure Injection Molding (LPIM) of Zirconia Parts [Volume 13, Issue 1, 2024, Pages 57-68]
Zirconia nano-particles
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Zirconium Carbide
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
Zirconium Carbide
Investigation of Thermal Properties of Titanium Carbide and Zirconium Carbide as a Function of Temperature and Pressure Using Density Functional Theory [Volume 10, Issue 4, 2021, Pages 115-126]
Zirconium Di-boride
Influence of Type and Pressure of Synthesis Environment on ZrB2-ZrC Nano-Structured Powder Characteristics Synthesized by MASHS as a Heat Protective Shield in Aerospace Applications [Volume 2, Issue 4, 2013, Pages 53-59]
Zirconium Diboride
Spark Plasma Sintering of ZrB2-SiC-Based Ceramics Reinforced with Nano-Diamond [Volume 7, Issue 4, 2018, Pages 59-73]
Zn
Synthesis and study of microstructure, mechanical and biocompatibility properties of Mg-Zn scaffolds [Volume 7, Issue 2, 2018, Pages 19-29]
ZnO
Synthesis of ZnO nanoparticles using an ionic liquid and investigation of their antibacterial activity [Volume 2, Issue 4, 2013, Pages 19-25]
ZnO
Optimization of Parameters from Perovskite Solar Cells by ZnO Aligned Nanorods [Volume 4, Issue 3, 2015, Pages 53-64]
ZnO
Investigation of Effect Electrolyte on Performance of Dye-Sensitized Solar Cells Based on Indoline Dyes [Volume 5, Issue 3, 2016, Pages 11-16]
ZnO
Synthesis of ZnO/Urtica Dioica Nanoparticles by Wet Chemical Procedure and Investigation of Its Antibacterial Activity Against Multiple Drug Resistant (MDR) Staphylococcus aureus Isolates of Diabetic Ulcers [Volume 10, Issue 3, 2021, Pages 79-88]
ZnO nanoparticles
The Study of kinetic Reaction of the Photocatalytic Elimination of Methyl Orange in the presence of Magnetic Composite of Fe3O4-ZnO Based on Graphene Oxide [Volume 9, Issue 1, 2020, Pages 49-56]
ZnO nanoparticles
Effect of Copper Ion Incorporation on Structure and Antibacterial Properties of ZnO Nanoparticles [Volume 10, Issue 1, 2021, Pages 53-63]
ZnO nanostructure
Performance Investigation of Piezi/Triboelectric Hybrid Nanogenerator based on Zinc Oxide Composite: Copper and Aluminum Effect [Volume 12, Issue 3, 2023, Pages 15-30]
ZnSe
Effect of the SPS Parameters on the Density of Sintered ZnSe [Volume 4, Issue 1, 2015, Pages 63-69]
ZrB2-SiCnano/micron composites
Investigation on Microstructure, Mechanical Properties and Pressureless Sintering Behavior of ZrB2-SiCnano/micron Composites Toughened by AlN [Volume 6, Issue 3, 2017, Pages 41-50]
